Jump to content
SAU Community

Recommended Posts

Went to get my R33 GTST rego inspection done, the dude points out that when the headlights are on, the outer lights shine.

But, when the high beams are turned on the outer lights turn off, and the inner lights turn on.

Said that it's illegal, he let it go though. But, said that i need to get it looked at when i get the car tuned next.

Is it standard for the lights to work this way or has someone been playing with the car before i owned it?

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/
Share on other sites

On high beam yes, both low beam + high beam are supposed to come on together = complete set.

No!

In skylines it's normal for the low beam to turn off when the high beam is flicked on,. But if it is still a concern you can modify the wiring to make them stay on

Yes!

Perfectly normal behaviour, not just in skylines but in pretty much every car. Generally the 2 lights (low and high) are not designed to work together.

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/#findComment-6188638
Share on other sites

As Duncan mentions, it is normal operation for any vehicle.

Depending on how good your eye sight is, on cars that run a double filament globe instead of two separate bulbs, you can even see that the filaments change which one is emitting light.

On dual globed cars it's super easy.

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/#findComment-6188698
Share on other sites

As Duncan mentions, it is normal operation for any vehicle.

Depending on how good your eye sight is, on cars that run a double filament globe instead of two separate bulbs, you can even see that the filaments change which one is emitting light.

On dual globed cars it's super easy.

as an extension to this, car like falcadores, switch the outer filament, and the inner globes also come on, giving 4 hi beam globes at the same time.

cars without the dual filament globe generally just switch.

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/#findComment-6188778
Share on other sites

On high beam yes, both low beam + high beam are supposed to come on together = complete set.

Ian, you've asked how mine work (in your subtitle).

In every 3x R34 GT-Rs I've had,...

* all four lights come on when the stalk is switched from low beam to high beam.

* upon flashing high beam, the low beams stay off & the high beams come on (probably to save the Xenons).

In my former R33 GT-R (series 1 without Xenons), I cannot recall.

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/#findComment-6188801
Share on other sites

Ian, you've asked how mine work (in your subtitle).

In every 3x R34 GT-Rs I've had,...

* all four lights come on when the stalk is switched from low beam to high beam.

* upon flashing high beam, the low beams stay off & the high beams come on (probably to save the Xenons).

In my former R33 GT-R (series 1 without Xenons), I cannot recall.

Yeah this is basically right; on our R34s, when you have the dipped (low) beam headlights on, if you then switch to high beam OR flash the high beams the low beam will stay on. In our case they're xenons.

If you have either just the parking lights or no lights on at all, then flash your high beams, the low beams ALSO come on. AFAIK this is a factory setting for R34s. I don't reckon it's a great idea though as xenons (HIDs) don't like to be turned off and on quickly as it'll burn them out faster.

On our R33s, the low beam would turn off when switching from low beam to high beam. Never had a problem with rego though. I think your 'shop is just being picky but at least he let you go with it.

In most of our other cars the low beam stays on when you switch to high beam; and only the high beam comes on if you flash the headlights with no other headlights on.

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/#findComment-6189847
Share on other sites

BTW just to clarify legality - all skyline xenons (to 34 at least, maybe 35 and 36 as well) are removed at compliance as they do not meet ADRs. If you have a skyline with them, they were refitted after compliance (or never removed :spank:)

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/#findComment-6189981
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...