Jump to content
SAU Community

Recommended Posts

Hey can I join the club?

Just upgraded to Deatschwerks 950cc injectors and retuned for E85

Very happy with the results!

From 274rwkw (98) to 314rwkw (E85) with a massive increase in mid-range power

Pushing 500HP and very responsive - full boost by 3250rpm

post-52301-0-98109800-1404807442_thumb.jpg

This is an overlay of the E85 and 98PULP dyno results on exactly the same set up (100% unopened) apart from the injectors & tune.

First time posting and I'm not sure If this is the best place to post..

I've got a RB25de neo 6 R34

100 000kmspost-135582-14054799325913_thumb.jpg

With a

AIResearch T60 T04E turbo

Externally gated on a slide industries manifold

700cc Bosch injectors

Apexi power FC

Bosch 044

Apexi FMIC

3inch stainless turbo back exhaust

Cometic head gasket

Arp studs

FFP

How much would I expect to see out of it?

How much boost could I push?

Could I run 300kw with that setup as a daily?

  • 2 weeks later...

rb25 neo

t67 10cm

880cc sards

sard reg

greddy rail

tomei type b

greddy intake

npc cushioned clutch

oil accumulator

oil cooler

3" straight trough

stock head gasket

98 bp

340 @17 psi graph in dyno thread

Unopened rb25 neo

Holset hx35 turbo

Chinese manifold

Custom intake manifold

Denso -850cc injectors

Turbonetics 44mm gate

3 inch exhaust

Spitfire coils

Sard fpr

Both 044 an 040

Z32 afm

Power fc

Car makes 304kw atw on 16 pound an 279Kw atw on only 12 pound

post-119725-0-64273200-1407021544_thumb.jpg

  • 8 months later...

1998 Nissan Skyline R33 Gts2.5t


40th Anniversary Edition.


Mechanical Nismo Selective 1.5 L.S.D. diff


Nismo G Max II clutch


Bilstein shocks with King springs


Whiteline adjustable swaybars front and rear


Whiteline adjustable nolethene bushes for camber/castor/toe at all four wheels


HKS triple layer dry pod filter


Z32 Mass Air Flow Meter


Sard adjustable fuel pressure regulator


555 Nismo injectors


Splitfire coils


Blitz 700x600x70 fmic (anodised blue)


HKS IV electronic vacuum controller (boost controller)


Blitz turbo timer


Trust alloy oil cooler with stainless steel braided lines


Apexi alloy radiator


Cusco high pressure radiator cap


D1 oil catch can


Master cylinder brake brace stop bracket


Project mU front discs [brakes]


Braided stainless steel brake hoses [full kit]


90mm exhaust with HKS Hiper 120mm s/s muffler


Cusco front tower strut bar


Snow Performance Stage 3 Boost Cooler water/meth injection kit


Garrett GT3076 WG turbo with 100mm port shrouded comp cover


HKS 40mm external wastegate [18psi spring rate]


HKS cast low mount manifold extrude honed and flowed


Tomei adjustable exhaust cam pulley


Tomei Poncams 256 degrees/8.5mm lift


Apexi Power Full Computer with Hand Controller



Making 302, so just snuck in, chart is in Dyno thread.


Apologies for the crappy format, I cut and pasted from a word file and CBF fixing it.

oh hai... forgot I made it into this club a while ago...

343kW on 1.65bar of boost (Mainline Dyno) on E85

Stock Motor, Stock Cams, Stock Head, Stock Manifold (Intake & Exhaust)

Hypergear SS2 (internal gate welded shut & 3" v-band exhaust)

Scotty Custom 45mm External Gate Mod on Turbo Housing

Turbosmart 45mm Hypergate External Wastegate

875cc Siemen DEKA IV Top Feed Injectors

Sard (fake I think) Fuel Pressure Regulator

Walbro 450L Fuel Pump

Splitfire Coilpacks

Hybrid FMIC

Plazmaman Swept Back Cooler Piping

Typical 3" Exhaust System (1x Resonator, 1x Mid Muffler, 1x Fujitsubo Rear Oval Muffler) & Screamer Pipe :)

Adaptronic ECU, self tuned

  • 3 weeks later...

Look at where the power curve is going. Straight over 400rwhp. Dyno cuts out. They are getting me back for a power run to have a full graph. This will give you an idea.

post-96233-0-20807300-1431143693_thumb.jpg

Look at where the power curve is going. Straight over 400rwhp. Dyno cuts out. They are getting me back for a power run to have a full graph. This will give you an idea.

HAHA that predictor is awesome, it's making on average a few hp more up to when the "dyno cuts out" but somehow it's going to gain 30hp? 405rwhp would be more on the money

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...