Jump to content
SAU Community

Recommended Posts

Hi guys next time this is updated by a mod the c34 and 260rs section needs to be corrected. 260rsstagea , numleg , gtr260 , and big boy dan are all rs260s and need to be moved to the autech 260 list. I would love to post up some new power figs but im still waiting on my wiring harrness conversion to be finished arrrgh

Hi guys next time this is updated by a mod the c34 and 260rs section needs to be corrected. 260rsstagea , numleg , gtr260 , and big boy dan are all rs260s and need to be moved to the autech 260 list. I would love to post up some new power figs but im still waiting on my wiring harrness conversion to be finished arrrgh

Nice observation!

Hi guys next time this is updated by a mod the c34 and 260rs section needs to be corrected. 260rsstagea , numleg , gtr260 , and big boy dan are all rs260s and need to be moved to the autech 260 list. I would love to post up some new power figs but im still waiting on my wiring harrness conversion to be finished arrrgh

Might have got mixed up in the refresh. I'll go through it all tonight, and put an update together for the mods.

Thanks.

Well, I fired off a updated one to Goldzilla the mod, who hopefully will update.

Please once you see the updated one, if you believe you have a spot in there or I have missed you out, please post up. Its the only way I can keep it updated. Especially if you have C34 powers above whats listed, or Drag times would be great.

If you don't make it into the Top 5 for the section, feel free to post up results here, but the list will obviously not be updated.

Cheers.

sounds like you need a modified torque converter and it will go very low 13's pretty easily

cheers

darren

Yeh that's the next mod on the list :)

That run was a 2.311 60' time so should be a big improvement when I get it

  • 3 weeks later...

To much too long too complicated. Kiss principle.

Plus, those who know people will know the mods, or can pm if they need to.

Just thought Scotty, you have a PI time don't you?

What about Ironpaw's dual fuel setup, e85 and gas? Perhaps all the other mods should be listed too?

Mark that down. Other mods aren't really required, but the fuel gives you an idea. What % extra does E85 give you over normal, non cheater fuel?

Just thought Scotty, you have a PI time don't you?

No mate, not yet. I missed out on this weekend's run as I wasn't sure the engine would be back in. As it is it needs a damn good tune, opening up the runners made a huge difference, its now running 19/20:1 on cruise. :unsure:

Yay i finally found something i can b on a leader board for! I've done a 1:06.5 round the queensland raceway sprint track (just to be clear its not the full length national track the V8 supercars use.) only mods to my c34 were coilovers, FMIC, turbo back 3inch and gtt brakes. Hopefully now that ive made some handling adjustments i can improve on this dreadfully slow time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...