Jump to content
SAU Community

Recommended Posts

Ok, I suspect the answers to these are deep within the forums somewhere, so please take pity on my busyness/lazyness and help me out with three simple questions.

Im planning to boost my R33.

1, What is the max pressure I can safely boost my R33 RB25DET?

2, At what boost level should I expect fuel cut to kick in? (ie, without a fuel cut defender, how high can I go without trouble?)

3, What power increase should I see (before and after approximate power if you know).

and (4) anything else to consider ?

My car is a manual turbo R33 RB25DET with pod filter, turbo back exhaust and R34 intercooler.

thanks heaps

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Boost is just a number but generally on stock comp with stock turbo 10 otherwise it's will miss and go no where. If you where to get a ecu then turn the boost up you will see around the 200 mark with stock turbo

2 & 3: anyone's guess. some people can go 10Psi no worries. i could only get 8psi. power wise depends as well. while you got a stock ecu id just do the high boost (constant 7psi) mod and be done with it. Get an aftermarket ecu then boost to 12psi and as said you will get up near 200rwkw

OK, so Im getting the picture that with my stock ecu, stock turbo I can set my boost from the current 7 to 10 and that should run alright, ie no fuel cut, no bullshit. No one mentioned it, but I hear the stock turbo should shoot out the exhaust at around 12psi, so I guess 10 will be safe for that. This is correct? also

What power do we think my car has now (stock turbo, ecu, R34 intercooler, turbo back exhaust)?

And what might it have on 10psi? how will power delivery/feeling change with this boost up?

I wanna know as I have about 8 weeks left living in Japan and I wanna know if I can safely up the power without killing anything before I ship the car back. paying for mechanical drama would be very bad, as moneys to tight to mention. OK, yeah, I just dont wanna have to budget mechanical failure. I also wanna know if it would be worth it, value for money wise. I would fit a boost controller shortly on returning from japan if I dont do it now, so im working out whats best to do when. thanks

RB25DET dyno thread would be your best place to look for est. power. But rough guess.. Somewhere around 160 - 180rwkw. You might be better waiting until you get the car shipped. How much money are you willing to throw at the car? Any specific goals you want to meet?

Food for thought :)

Ty.

Without a tuned ecu its pointless upping the boost really from my experience with my car once ya got an exhaust cooler and filter u should be around 160-170rwkw my car was running 11psi was nistuned and made the same power on 8psi my car was boring as bat shit till 5500 then took off ! save ya coins for an ecu & tune then look at the boost increase

The goal is to have as much fun with it drifting as I can. I can probably do it three more times before i gotta put it on a boat and leave. Ive been concerntrating on suspension work all along rather than power, but recently Im getting a little tired of the stockish power. I want to be able to spin it up easier in 3rd gear. Seeing as Im never going to own a car and live in japan again, it seems like I should just go for it and get the extra power.

When I get to aus I will slowly think about engine/tuning stuff.

you should be able to hit 9 or 10psi, make 180kw (with TBE FMIC + fuel pump) and be reasonably safe

the stock turbo is very delicate and you should reconsider bothering...

FYI Mick_o is tuning is car to 25psi+ this week, SimonR32 also runs 26psi - both on OEM RB25DET sump/rocker. Mick has GTX71 + E85, simon has T67 + E42.5. Long story short im sure boost pressure is not that important given all the other (read many) variables are in check.

If u run 10psi and it miss fires there are other problems I.e spark plugs, coil packs etc. tbh 3psi increase with a fairly stock setup isn't going to give you the "holy shit the car is soo fast". Yeah sure it feels a little quicker but why risk damage for the sake of like 10kw.

As others have said, after market ecu. If u don't want huge power go nistune. You'll need a few other parts to make it compatible but with a tune you'll net some decent gains. Just make sure you bring it to someone who knows how to tune it.

Buy this-

http://www.ebay.com.au/itm/Turbosmart-Boost-Controller-New-Box-Diesel-WRX-Skyline-Silvia-TS-0101-1002-/190611843917?pt=AU_Car_Parts_Accessories&hash=item2c6159eb4d#ht_2967wt_905

Then do this-

I done it to mine and have exactly the same mods as u except i have a blitz cooler, the power increase is noticable. Run 8-10psi.

Cheap and easy.

post-87367-0-52722900-1328002520_thumb.jpg

<br />just remember that it's pounds <b>per square inch</b><br /><br />so 10 psi on a stock turbo is very different to say 10psi on a T88<br />
<br /><br /><br />

Whilst everything you say there is true, I am in severe doubt about the scientific reasoning behind your statement.

Boost should really be considered the same way as when dealing with electrical current. 50,000 volts at 0.5 amps is very different to 50,000 volts at 100 amps.

ie; 10psi at 200cfm (for examples sake, stock turbo), compared to 10psi at 2000cfm (T88).

Ty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...