Jump to content
SAU Community

Recommended Posts

Hello, I live in Japan and I would say (From past experience) it would be hard to impossible for you to get a job at an auction house, regardless of the tight job market, it would be hard under any circumstances. I recommend you try to get a job at a car exporter - these jobs too are in short supply, but if you get a list of used car exporters and send them a job application I think the cahnces of you getting a job are good. The job you get of course may not be what you expect or want !

Good luck.

What qualifications would I need to work at an auction house in Japan for a year?

I don't know how to speak or write Japanese so would this be a problem?

Also, would it be easy to score a job?

hi mike46

I am looking for a good condition skyline c210 in japan , what are my chances of finding one . i have a mint australian delivered 1977 c210 coupe & a importer from sydney as told me they are not collectable & readly avaliable .

hope all is good any reply would be great .

thanks my77sky

mick

  • 3 weeks later...

If you can get a working holiday visa (under 30 and havent got one in Japan before) and you are a native English speaker it isn't difficult. If you can't get a working holiday visa then it may be impossible to get a working visa without a degree as an English teacher. elrodeo666 has said there are ways around it so you are better off PMing him if you can't get the working holiday visa.

This should be stickied : http://www.mofa.go.j...visa/index.html

If you cant tick the box then sorry no visa unless you have some coin (around $50K) then you can use the money short term for investors visa.

I have businesses in Japan and no visa and come and go as I please but trust me, it took a long time and effort and money to get to that stage.

Without stating the obvious, I'm going to go ahead and assume the only reason anybody wants to go to Japan (with the context of us being on a Japanese performance car forum) is to bring back a personal import.

AFAIK, you cannot bring back a personal import on a Working Holiday Visa, only a Working Visa.

But basically, it sounds hard to secure a job, unless I go spend four years at Uni first?

Better off spending that time earning, then paying all the import fees?... Sigh.

Without stating the obvious, I'm going to go ahead and assume the only reason anybody wants to go to Japan (with the context of us being on a Japanese performance car forum) is to bring back a personal import.

AFAIK, you cannot bring back a personal import on a Working Holiday Visa, only a Working Visa.

But basically, it sounds hard to secure a job, unless I go spend four years at Uni first?

Better off spending that time earning, then paying all the import fees?... Sigh.

Edit: Sorry Loach, were you suggesting I go on a Working Holiday Visa, then, while in Japan after finding a job, change my Visa to a Working Visa? If you can, that sounds great.

Edit Edit: Apparently that was reply, not edit. =/

Edited by Idaten

Mate you can go on a tourist visa and change to a working visa same with WH visa to working visa.

Your problem is do you and can you meet the working visa criteria !

If you really want to pursue getting a visa then the skilled labour visa is the one to aim at.

There's plenty of work through Japans winter for english speaking ski and snowboard instructors,rafting guides so go to an instructors course and get qualified.

Other visa is the Cultural visa e.g go study Ikebana but you will need to do your research for this visa and you are technically not allowed to work so will have to show you can financially support yourself for 1 year. e.g you will need to show $25,000 in the bank at time of applying and good idea to have it in your account when entering Japan.

In all honesty, get a job in Australia, save the money and buy your car Oz.

Save some more and go have a holiday and spend your money on parts in Japan.

Edit: Sorry Loach, were you suggesting I go on a Working Holiday Visa, then, while in Japan after finding a job, change my Visa to a Working Visa? If you can, that sounds great.

Edit Edit: Apparently that was reply, not edit. =/

On a working holiday visa you can work as you like, I have had friends come over working as rafting instructors and English teachers with no experience and no degree. There is no need to change to a Working Visa. However, on a Working Holiday Visa, you are limited to one year and if you don't have any qualifications etc you aren't going to be getting the good jobs. In regards to personal imports on a working holiday visa I am guessing they would be completely separate as the Visa is the Japanese Governments regulation of people living in Japan and the personal import rules are the Australian Government's regulation of vehicles which can be registered in Australia.

From the RAWS website http://www.raws.com....portSchemes.asp

"If you are an Australian Citizen or Permanent Resident it is possible to bring a car into the country as a 'personal import'. For a car to qualify, however, you must have owned and used the vehicle in its country of registration for at least 12 months. The car still requires an import approval to be granted and registration and insurance information must be provided to prove that you have owned & used the car. Usually there are a number of minor modifications required to bring the vehicle to the standard required for registration by your local registering authority. The Transport Department in your state is the best contact to find out the specific requirements."

It doesn't say anything about the type of Visa you were on when using the car in a foreign country and considering the amount of countries and types of Visas available it would be a nightmare to regulate and enforce. From what I understand what the Traffic Authorities in Australia are concerned about is whether you have owned and used the car in a foreign country. But as the above excerpt states you need to contact the traffic authority in your state to be sure. I agree with elrodeo666, if you are only coming here to get a cheap import it is going to work out cheaper and be a lot less hassle to buy in Australia. However if you want to live in Japan and don't have a degree then a Working Holiday Visa is the go, assuming you are 30 or under and haven't had one before.

Edited by *LOACH*

You can with a bit of knowledge get a extension of 3 months on the WH visa but it is at the discretion of Japanese immigration and you will need a bloody good excuse.

As Roach says you can pretty much do any type of work on the WH visa but they frown on work in the Entertainment industry e.g Host and Hostess , New half etc.

Cops are pretty full on and do do raids on clubs known to have foreign workers.

Another option is Japanese Language Student Visa but the course will cost you close to $6,000 plus again you will need to show you have at least 20-25K in your bank.

And another option is get married...there's plenty of Japanese girls out there looking for gaijin husbands.

I have a mate who is on no 5 wife at present. Trades in for a new and improved model every 3-4 years.

Personal import laws have got a lot stricter and you will have to send a photocopy of every page of your passport and documentation to prove you have lived, owned , registered, garaged(e.g parking space) the car for the minimum 12 months.

Just go have a holiday..if you like it then you can decide if you want to live there.

Unless you have a really special car its so bloody cheap to just buy cars and drive them until they break and then go buy another.

Reserved for later. Will add big reply.

For now:

Loach: I apologise. I read: http://www.j-spec.com.au/info/Personal-imports and was working with false information.

elrodeo: Funny that advise. I was actually telling everybody today, "Seems like too much hassle. Will probably work here and just import one."

Although a parts trip for the ER34 may work better. Cheers.

(Still going to edit.)

The times that we are in you dont want to be in any country other then Australia when it comes to financial security from the slide in the world economy, and japan is not so crash hot atm its showing signs of growth early 2012 though. Its good to relocate during booms in the world economy right now i think its a little foolish especially for no skill jobs that pay minimium wage.

Edited by starwarz

hmm, so its not just go and teach english huh..

sounds like there are more options for people like me who aren't white.

Have you looked into getting a job in Nigeria. There are some amazing opportunities available there. They can even give you upfront payments of $50 000 000 American dollars before you start the job. Just give them your account details and they will sort it all out for you.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
×
×
  • Create New...