Jump to content
SAU Community

Recommended Posts

So the story i goes i started off in my apprentice years reading through HPI mags and AUTOSALON, sifting through the pages and becoming a sucker for the GT-R.

However at the age of 18 there was no way i could afford it, so i put all my hard earned on a Gts-t instead. Which was my pride and joy for two years, started off completely stock then added mild mods featuring

coilovers

blitz boost controller

hks front mount

x force full system

carbon boot and bonnet and some enkei rims

Bride brix II

OS Giken clutch

how it started

pictures058.jpg

end result

28012008008.jpg

now i look back on it there are many things i wouldnt have done. After this i jumped over to the dark side, purchasing a then new 08 6.2L V8 6 speed manual VE maloo. have had the car for two years and now puts out 487hp at the rears

IMG_0843.jpg

a nice car to drive and very torquey but something was missing. I searched through carsales looking for something at a decent price and a good base to start with.

then i found this!!

IMG_0569.jpg

97 series 3 with re55s semi's, some hks pods, cat back exhaust and nismo suspension.

from here my bank balance took a dive as the idea's built up

  • Replies 102
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

thanks guys, i agree with you about the GTST. Which is why i said i wouldnt have done certain things if i could go back. Also as of yesterday i just got my standard bonnet back as it was given to me in a pretty bad state!!

from there it went straight to C-Red tuning in Perth to receive some goodness

IMG_0619.jpg

IMG_0622.jpg

HKS frount mount

IMG_0667.jpg

KOYO radiator

IMG_0644.jpg

DBA slotted rotors and new tie rods

IMG_0643.jpg

HKS dumps

IMG_0621.jpg

TRUST front pipes

IMG_0601.jpg

2860-5'S

IMG_0600.jpg

BOSCH 670cc injectors

IMG_0603.jpg

along with these i got a APEXI N1 cat back, power fc was first originally used but had problems running the injectors...... so i swapped over to a HALTECH plug and play and that fixed it

so from here the car went on to make 390.7hp atw on 95 octane. As im from the pilbara, thats all we have so far. But plenty left in it when we do get it in a couple years... even though we pay $168.7 just for 95 already...... thats a different story.

from here i went on to replace my rims. Supposedly the rims on there were TE37's....

IMG_0692-1.jpg

after a couple of weeks wait, i got my hands on these babies!!

IMG_0755.jpg

on the car

IMG_0943.jpg

wrapped in nitto NT05's!

after the rims got sorted, i sought to get rid of the old and faded spoiler

IMG_0976.jpg

replaced with AUTO SELECT devil wing

IMG_0978.jpg

before

IMG_0935.jpg

after

IMG_0983.jpg

also changed out my tail lights to QEST items. nothing beats them!!

before

IMG_1017.jpg

after

IMG_1025.jpg

IMG_1021.jpg

these have transformed the way the car looks at night and couldnt be happier. They use standar nissan lights, so fitment is not a problem!!

cheers guys, i ordered them through streeter. In saying that Marcus was a great help!! They really are worth every coin.

i ordered them with black LED board. You get three options, this is what the black looks like

IMG_1026.jpg

your not wrong, the white and the crystal options are way too ricer imo. Silver BCNR's ftw thumbsup.gif

updates*

ordered some freshen up parts for interior and exterior from rhdjapan.... just waiting on shipment

  • 2 weeks later...

standard bonnet got a respray

IMG_1096.jpg

IMG_1101.jpg

new LED's for the entire car, waiting on my interior gear to arrive before fitment

IMG_1138.jpgthumbsup.gif

cant wait to see how it turns out. Sick of seeing that faded yellow tinge on the dash cluster

Edited by JDM33

Agreed there :thumbsup: The rims are a very nice contrast to the KR4 silver, ties in really well. I really need to pull my finger out and buy some series 3 xenon lights since mine got swapped out at compliance :dry:

Great list of mods so far to

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...