Jump to content
SAU Community

Recommended Posts

Is the tacho in the S13 reading correctly? Sounds like the ECU is hitting it's rev limiter (constant miss noise you mention). Maybe get another stock or an after market tacho and see what it reads? Something like an SAFC NEO or Greddy Infometer will also do the trick - see what the ECU is seeing.

old mate of mine had this problem when we put a 25 into his s14, would just rev up then bog down/ pop/ lose power.. definitely was NOT LIMITER..

We tried another r33 ecu which we knew worked properly, and in the s14 the problem was still there.

he had the loom checked and was all ok, so only thing that never got checked was sensors on the engine

still has the problem now, keen to know if u find out the cause..

old mate of mine had this problem when we put a 25 into his s14, would just rev up then bog down/ pop/ lose power.. definitely was NOT LIMITER..

We tried another r33 ecu which we knew worked properly, and in the s14 the problem was still there.

he had the loom checked and was all ok, so only thing that never got checked was sensors on the engine

still has the problem now, keen to know if u find out the cause..

EDIT: just remembered something , if u backed up right before limiter and got on the gas again it would hit limiter normally... does urs do the same?

DOUBLE EDIT: WTF HAPPENED TO MY EDIT HAHAHAHA

Edited by BrynDETT

don't get why half the ppl on this forum give sarcastic/ useless information just because they think the topic is not worthy...

think some ppl need to need to shut up when they have nothing to say, instead of trying to get their post count up...

end rant

OP might not know wat rpms he is reaching because the s13 tacho will read 1/3 out... the needle simply goes past the gauge..

it doesnt matter what rpm its reaching, its still not working properly

it is pretty critical actually to know what rpm it's reaching.

the op needs to include more relevant facts if the interwebz is going to solve the issue.

otherwise take it to a real life shop with a mechanic man who can diagnose accurately from seeing the car and how the motor is running, and fix.

you can't just say "it's missing and sounds weird, please diagnose".

Edited by Ronin 09

Does fitting a 6-cylinder engine into what is normally a 4-cylinder car involve anything that faintly resembles an adjustment to the tacho so that it now calculates for a 6-spark cycle instead of a 4-spark cycle?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...