Jump to content
SAU Community

Recommended Posts

FWIW, Nankang has technology licencing and technical support agreements with Yokohama... That's from Yokohama's website, not Nankang's - they don't mention it at all. Who knows how much of their technology is involved with the AR1, but it was one of the factors that encouraged me to take the gamble on these $209 semis! lol I wouldn't be so quick to write them off before trying them.

Funnily enough the NS2-R120 are my pick of the budget road/track tyre. The yoki and hankook are in a different league, both price and performance. But out of the NT03, 123s, RSRR, KU36 battle, I'd pick the soft NS2-R anyday.

What's wrong with the R888 (besides being the same compound as NT01)?

The replacement tyre R888R is street legal, it'll be interesting to see if the upcoming NT01 replacement will be too, and whether they'll again share the same compound.

Also the NT01 vs. RS-RR comparison seems a little odd, they're a different category tyre aren't they (100 treadwear semi vs. 140 treadwear street semi)?

yes, it is odd for a tyre like the RS-RR to set similar times to a semi slick.

NT01s on the Soarer were only 7 tenths faster than the 595SS and Achillies Sport street tyres they replaced! It had less power back then with just stock intercooler and exhaust, so that gives a good comparison on their lateral grip abilities - or lack thereof... They were monumentally disappointing.

Swap to to proper semis and it was a second and a half faster than them - on a 60 sec lap that really only has 4 corners!

The NT01s worked OK at the hillclimb with the help of tyre softener. That's something I suppose...

What's wrong with the R888 besides being the same as the NItto? Nothing!

yeah well, your posts in the SAU Circuit Times thread says that time you did on Nitto Invo & Federal 595 RS-R was your 2nd time ever at Wakefield Park, and the next time also included going from "stock-ish" power and "some horse shit" suspension to a "Hypergear SS2 running 1.4bar ~300kW" and upgrading the suspension with "Lower sprinngs with Bilstein Shocks + 24mm F&R Whiteline anti-roll Bars"

maybe not the best way to compare the tyres themselves, huh?

Edited by hrd-hr30

Well I have a friend and his brother (share car) that have gone from 595 RS-R on a 180SX to NT01s (same size, same everything) and managed 3 seconds better, tipping into the 1m07s mark - purely from a tyre change.

So yeah.

Look, in light of the fact that I'll get called a dickhead for not taking hr30's word for it I'll just say this.

You are the only person I have ever heard of say that federal 595 ss and Achilles are sports are as quick as nt01's. That must make the nt05 lightning quick according to what I see on the interwebs from other users.

  • Like 1

Look, in light of the fact that I'll get called a dickhead for not taking hr30's word for it I'll just say this.

You are the only person I have ever heard of say that federal 595 ss and Achilles are sports are as quick as nt01's. That must make the nt05 lightning quick according to what I see on the interwebs from other users.

Look, in light of the fact that I'll get called a dickhead for not taking hr30's word for it I'll just say this.

You are the only person I have ever heard of say that federal 595 ss and Achilles are sports are as quick as nt01's. That must make the nt05 lightning quick according to what I see on the interwebs from other users.

Not what I said...

Well I have a friend and his brother (share car) that have gone from 595 RS-R on a 180SX to NT01s (same size, same everything) and managed 3 seconds better, tipping into the 1m07s mark - purely from a tyre change.

So yeah.

This unequivocal evidence has thoroughly convinced me.

  • Like 1

This unequivocal evidence has thoroughly convinced me.

You really don't like Nitto eh? I know Z221 are better but for the price NT01 tyres are good enough for most of us and don't degrade as fast as Z221 which go rock hard after 3 to 4 track days

Not what I said...

I read the same, you pretty much insinuated NT01 tyres perform just as good as Federal 595 SS.

Anyhow each to their own. I'm happy with my NT01 tyres, I'm happy with the price and also few other guys I track with are happy with them.

If I had more money, and had z221 per track day then sure why not, but at the end of the day I prefer not to kill my limited cash on fancy tyres that are useful for about 2 track days.

I don't cry over a bad lap time, I'm purely there to have fun and enjoy driving my shit box beyond its limits.

While I haven't used most of the tyres discussed recently, I have done a fair amount of time on the Z221s in mediums, have seen them on Neil's hillclimb car in softs, and have seen them on other rally or supersprint cars and they are probably the best semi around at the moment. They also lasted very well, there were cars at the Bathurst 6 hours who used 1 set all weekend....

Much more importantly though, they are very cheap compared to the established brands like yoko or dunlop. If you can't afford the hankooks you can't afford semis.....and yes tyres are probably the most expensive part of tracking your car (along with brakes, fuel, maintenance, accommodation, tow car fuel, entry fees etc)

Thanks Duncan for the mature response, we can all agree Z221 tyres are brilliant however my mate says he finds they lose their performance dramatically after the 3rd or 4th track day.

Harry, you should get a better car you'll do better times.

mebbe they do...but I did my fastest ever lap in a production car on very old Z221s the other week. There are a lot of variables in tyres and how they are treated so it's not surprising people get different results.

  • Like 1

mebbe they do...but I did my fastest ever lap in a production car on very old Z221s the other week. There are a lot of variables in tyres and how they are treated so it's not surprising people get different results.

What other tyres do you see coming close to their performance?

I wouldn't mind something I can drive to and from the track with so I don't need to swap wheels.

Surprised someone would pick 595 RSR over NT01 for track use...

btw, pretty certain the NT01 is street legal here in Australia http://www.ozzytyres.com.au/blog/the-nitto-nt-performance-and-invo-tyre-range/ and a few other articles mention the same.

Agreed with the RS3 Z221. One of the best Semi. Even if you go one step down, the RS3 Z222 is one of the best bang for buck.

Curious, has anyone tried the new 595 RS-RR? (Not the 595 RSR) I have been wondering how they perform because they are dirt cheap...

Yep, having driven on Hankook Z2000S, Yokohama A032R, Yokohama A050M, Bridgestone RE55S, Toyo RA1, Toyo R888, Federal FZ201M, Nitto NT01, Hankook Z221 C70, Hankook Z214 C50, Hoosier R6, Nankang AR1, and streeters like Falken Azenis, Kumho KU36, Federal 595 RS-R, Hankook RS3 Z222 in various cars over the past 17years, I would not buy NT01s again. Better off buying RSRs or similar IMO, or literally any other semi slick. The reasons for this opinion are;

1. I've driven on better tyres and don't really want to go slower again. Some of those better tyres also have the advantage of being road legal and cost less!

2. Street tyres like RSRs or RS3s can do very similar times to NT01 in experienced hands, are significantly cheaper and road legal. And in some events they can keep you in a lower class.

3. If you're in a class that allows semi slicks, you are starting well behind the 8 ball if you choose NT01s.

But if you're just doing track days, don't really care about getting the best possible time your car can do, or haven't driven on any other semis, and just want a tyre that doesn't cost too much and lasts ages, then the NT01s might suit your purposes. It doesn't make them a good tyre compared to other options IMO.

NT01 are not legal in Australia. As explained before they have no marked load index on the sidewalls = not road legal. Cops are normally clued up on that from pinging people in utes for not having load ratings to match their tyre placard. They are also marked for competition use only, like full slicks.

And even if you ignore that and pretend they are road legal because ozzytyres website said so, the "legal looking" part of their 2 stage tread depth (assuming you guys don't consider 2 groove slicks road legal? They are DOT, after all) is just 3/32" deep. That's 2.38mm. Meaning you have 0.88mm of wear before they'd be illegal anyway.

I just got a set of RS-RR for one of my other cars. There'd be no point explaining what they're like though...

  • Like 1

I was going to say...personally I'd give Harry's opinion some credit given he has been driving a range of cars on a range of circuits over a decade or 2....but he got in first.

I mostly keep an eye on 245/45/17 prices because that's what I run on the race car, my opinion from fastest to not:

Hankook Z221 $400ea

Dunlop DZ03 $550ea

Federal FZ201 (dry only) $300ea

Yoko A050 $550ea

Bridgestone Re55s $550ea

Yoko A032

Yoko A048

Dunlop D01J/D98J

I've probably used a few others but can't remember everything

Other tyres like Toyo 888 I've never tried but anyone who has on a heavy car says they don't work well. They seem to be good on clubbies/mx5 etc. I've never tried the Nittos.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...