V Cams

[vorse]

Any one got any information on these??

i know HKS stopped making them are there any similar systems out there?

any information much appreciated

Edited April 27, 2012 by vorse

[vorse]

wont allow me to edit page found this tid bit floating around the net really curiouse as to who has experience with these as im also looking at building towards the 600hp goal http://www.gtr.co.uk/forum/162452-will-hks-v-cam-step-pro-system-tomei-2-8-cooling-channel-engine-kit.html

also diffrences between v1 v 2?

[KiwiRS4T]

Think I saw someone on here is adapting VCT for the RB26 head.

[vorse]

^{any idea purely interest atm would love to pic there brains?}

[Piggaz]

HKS do make them still

There are 3 versions. The first 1 uses a 248 degree cam @ 8.7 mm of lift and swings 30 degree's.

Step 2 uses a 264 @ 8.7 mm lift and swings a little more. I think its 50 degree's

Step 3 uses a 264 @ 10.0 mm lift and swings 55 degrees. (This is all off the top of my head so it may not be spot on)

I have asked the question to the guy from HKS that built my head over the past 12 months which version I should use. On a 2.8 with -5's he recomended the Step 2.

Hope that helps.

[Piggaz]

http://www.hks-power.co.jp/en/products/engine/rb26_vcam/index.html

Click me ^^^

[DVS JEZ]

Think I saw someone on here is adapting VCT for the RB26 head.

Red R Racing will be doing mine when i remove my head

[Piggaz]

Red R Racing will be doing mine when i remove my head

Any info about this mate or is it a little hush hush?

[SS8_Gohan]

i asked Paul ages ago, and at that stage he was only doing it with full engine builds, but sounds like things have changed. ERD will also do it, but like Red R, you gotta send them the head.

[FineLine]

i asked Paul ages ago, and at that stage he was only doing it with full engine builds, but sounds like things have changed. ERD will also do it, but like Red R, you gotta send them the head.

ERD are currently building a ballsnall rb20 that is going to have the in house vcam setup.

An rb20 with some low down grunt pehjaps. Whoda thunk it.

[NYTSKY]

Depends what you call low down grunt lol

[zebra]

ERD are currently building a ballsnall rb20 that is going to have the in house vcam setup.

An rb20 with some low down grunt pehjaps. Whoda thunk it.

doesnt the NEO RB20DE have NVCS already?

and solid lifters

[FineLine]

Depends what you call low down grunt lol

It will probably have more than that lag slag you built.

[FineLine]

doesnt the NEO RB20DE have NVCS already?

and solid lifters

NFI Zeb, I have never been interested enough in 20's to look in to it.

[NYTSKY]

I ♥ LAG!

[vorse]

Cheers for the info looking like stage two Any hint as to what red r are charging to do the head ?

[wedge_r34gtr]

i asked Paul ages ago, and at that stage he was only doing it with full engine builds, but sounds like things have changed. ERD will also do it, but like Red R, you gotta send them the head.

Didn't know Paul was doing this....mmmm i see a new direction for my build . I also see my bank account draining too .

[EAT26]

ERD have a Vcam set up, I currently have the head modifications required however need the Cams, and a some little bits and pieces here and there to finish it. HYPED6 has the same set up in his 32 GTR with a T04z. with HUGE improvements in the rev range.

[MRHD66]

Think I saw someone on here is adapting VCT for the RB26 head.

they should just get a RB25neo head

[jangles]

they should just get a RB25neo head

Then adapt the block, ports, inlet to suit?