Jump to content
SAU Community

Recommended Posts

My tuner said i need to get a aftermarket fuel reg.

He forgot to mention if i should get a rising rate or a fixed one.

(malpassi,turbosmart or other)

The car is a r33 gtst.

mods so far

fmic

haltech ecu

turbo back exhaust

bosch fuel pump

splitfire coilpacks

greddy ebc

hyflowed turbo

any thoughts would be great with this one.

thanks

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/
Share on other sites

Do it properly and buy a set of injectors and use the factory regulator (its fine for over 350rwkw).

Obviously depends on the hi-flow as to how viable a FPR is (without injectors).

1. If it'll only make 220rwkw then ok fair enough

2. If the hi-flow will make 250rwkw+, then dont waste time and get a set of injectors

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6333497
Share on other sites

As above, and generally all are rising rate? (ie with a 1:1 as the manifold pressure rises so does the fuel pressure)

yes, it absolutely needs to be rising rate in a turbo car - the rising means that fuel pressure rises as your boost does.

Um, point of order here. Rising rate regs actually increase the fuel pressure faster than the increase in signal (manifold) pressure. ie, the slope is greater than 1. Rising rate is actually a poor description for them, but that's just how it is. Most things like that are poorly named in the car world where they wouldn't be in the engineering world.

Normal fuel regs are "constant rate".....if you were to use the same poor terminology. But what they really keep constant is the delta P across the injectors.

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6334940
Share on other sites

there is nothing wrong with changing the FPR, way go to the expense of injectors if a FPR will "fix it" if it doesn't need them, ie if it is getting to 99% duty cycle and the op isn't going higher with power then way not just do the FPR and give himself some headroom and save some coins, other then "it's not the right way to do it" cause the higher ressure will also help atomisation

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6335099
Share on other sites

If you just need to sneak in a few extra psi to get you accross the line, then just get a nismo fpr that bolts onto your stock rail.... simple and neat.

If your trying to screw 50psi base pressure into it, then get injectors. Nismo, sard etc.

If you just wan't a shiny new toy for your engine bay... buy a well known brand name and make shure it's genuine.

Cheers

Justin

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6335103
Share on other sites

Do you plan on going much further with the power upgrade?

If you plan on going much further, grab some larger injectors. I have run 550s within standard FPR - but consider that most

After market injectors are rated based on a 3kg base fuel pressure, the factory FPR is rated at 2.55 kg

So 'best' option would be to get some larger injectors and a FPR - as mentioned earlier, Nismo bolt on type is a good option, minimal stuffing around and work well with the factory fuel rail.

For a budget upgrade to give a little extra injector headroom - a FPR by itself can do the job well - once again, Nismo type is neat, easy to fit and works well.

Not a fan of rising rate FPR, as you end up with higher pressure than the injectors are rated at

My 0.02c

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6335164
Share on other sites

  • 8 months later...

well that's the thing. any standard (or tuned) ECU is based on a specific base pressure. If you put an adjustable FPR on and are not retuning, you need to set it to the same base pressure as the previous FPR, ie there is no point.

The only real use to an adjustable FPR is to get maybe 10-20% more flow out of injectors without swapping them for something larger. In that case you must retune the car anyway, so set it to the standard base + whatever % you need and tune it from there.

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6730604
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...