Jump to content
SAU Community

Recommended Posts

My tuner said i need to get a aftermarket fuel reg.

He forgot to mention if i should get a rising rate or a fixed one.

(malpassi,turbosmart or other)

The car is a r33 gtst.

mods so far

fmic

haltech ecu

turbo back exhaust

bosch fuel pump

splitfire coilpacks

greddy ebc

hyflowed turbo

any thoughts would be great with this one.

thanks

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/
Share on other sites

Do it properly and buy a set of injectors and use the factory regulator (its fine for over 350rwkw).

Obviously depends on the hi-flow as to how viable a FPR is (without injectors).

1. If it'll only make 220rwkw then ok fair enough

2. If the hi-flow will make 250rwkw+, then dont waste time and get a set of injectors

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6333497
Share on other sites

As above, and generally all are rising rate? (ie with a 1:1 as the manifold pressure rises so does the fuel pressure)

yes, it absolutely needs to be rising rate in a turbo car - the rising means that fuel pressure rises as your boost does.

Um, point of order here. Rising rate regs actually increase the fuel pressure faster than the increase in signal (manifold) pressure. ie, the slope is greater than 1. Rising rate is actually a poor description for them, but that's just how it is. Most things like that are poorly named in the car world where they wouldn't be in the engineering world.

Normal fuel regs are "constant rate".....if you were to use the same poor terminology. But what they really keep constant is the delta P across the injectors.

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6334940
Share on other sites

there is nothing wrong with changing the FPR, way go to the expense of injectors if a FPR will "fix it" if it doesn't need them, ie if it is getting to 99% duty cycle and the op isn't going higher with power then way not just do the FPR and give himself some headroom and save some coins, other then "it's not the right way to do it" cause the higher ressure will also help atomisation

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6335099
Share on other sites

If you just need to sneak in a few extra psi to get you accross the line, then just get a nismo fpr that bolts onto your stock rail.... simple and neat.

If your trying to screw 50psi base pressure into it, then get injectors. Nismo, sard etc.

If you just wan't a shiny new toy for your engine bay... buy a well known brand name and make shure it's genuine.

Cheers

Justin

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6335103
Share on other sites

Do you plan on going much further with the power upgrade?

If you plan on going much further, grab some larger injectors. I have run 550s within standard FPR - but consider that most

After market injectors are rated based on a 3kg base fuel pressure, the factory FPR is rated at 2.55 kg

So 'best' option would be to get some larger injectors and a FPR - as mentioned earlier, Nismo bolt on type is a good option, minimal stuffing around and work well with the factory fuel rail.

For a budget upgrade to give a little extra injector headroom - a FPR by itself can do the job well - once again, Nismo type is neat, easy to fit and works well.

Not a fan of rising rate FPR, as you end up with higher pressure than the injectors are rated at

My 0.02c

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6335164
Share on other sites

  • 8 months later...

well that's the thing. any standard (or tuned) ECU is based on a specific base pressure. If you put an adjustable FPR on and are not retuning, you need to set it to the same base pressure as the previous FPR, ie there is no point.

The only real use to an adjustable FPR is to get maybe 10-20% more flow out of injectors without swapping them for something larger. In that case you must retune the car anyway, so set it to the standard base + whatever % you need and tune it from there.

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6730604
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...