Jump to content
SAU Community

Recommended Posts

My tuner said i need to get a aftermarket fuel reg.

He forgot to mention if i should get a rising rate or a fixed one.

(malpassi,turbosmart or other)

The car is a r33 gtst.

mods so far

fmic

haltech ecu

turbo back exhaust

bosch fuel pump

splitfire coilpacks

greddy ebc

hyflowed turbo

any thoughts would be great with this one.

thanks

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/
Share on other sites

Do it properly and buy a set of injectors and use the factory regulator (its fine for over 350rwkw).

Obviously depends on the hi-flow as to how viable a FPR is (without injectors).

1. If it'll only make 220rwkw then ok fair enough

2. If the hi-flow will make 250rwkw+, then dont waste time and get a set of injectors

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6333497
Share on other sites

As above, and generally all are rising rate? (ie with a 1:1 as the manifold pressure rises so does the fuel pressure)

yes, it absolutely needs to be rising rate in a turbo car - the rising means that fuel pressure rises as your boost does.

Um, point of order here. Rising rate regs actually increase the fuel pressure faster than the increase in signal (manifold) pressure. ie, the slope is greater than 1. Rising rate is actually a poor description for them, but that's just how it is. Most things like that are poorly named in the car world where they wouldn't be in the engineering world.

Normal fuel regs are "constant rate".....if you were to use the same poor terminology. But what they really keep constant is the delta P across the injectors.

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6334940
Share on other sites

there is nothing wrong with changing the FPR, way go to the expense of injectors if a FPR will "fix it" if it doesn't need them, ie if it is getting to 99% duty cycle and the op isn't going higher with power then way not just do the FPR and give himself some headroom and save some coins, other then "it's not the right way to do it" cause the higher ressure will also help atomisation

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6335099
Share on other sites

If you just need to sneak in a few extra psi to get you accross the line, then just get a nismo fpr that bolts onto your stock rail.... simple and neat.

If your trying to screw 50psi base pressure into it, then get injectors. Nismo, sard etc.

If you just wan't a shiny new toy for your engine bay... buy a well known brand name and make shure it's genuine.

Cheers

Justin

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6335103
Share on other sites

Do you plan on going much further with the power upgrade?

If you plan on going much further, grab some larger injectors. I have run 550s within standard FPR - but consider that most

After market injectors are rated based on a 3kg base fuel pressure, the factory FPR is rated at 2.55 kg

So 'best' option would be to get some larger injectors and a FPR - as mentioned earlier, Nismo bolt on type is a good option, minimal stuffing around and work well with the factory fuel rail.

For a budget upgrade to give a little extra injector headroom - a FPR by itself can do the job well - once again, Nismo type is neat, easy to fit and works well.

Not a fan of rising rate FPR, as you end up with higher pressure than the injectors are rated at

My 0.02c

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6335164
Share on other sites

  • 8 months later...

well that's the thing. any standard (or tuned) ECU is based on a specific base pressure. If you put an adjustable FPR on and are not retuning, you need to set it to the same base pressure as the previous FPR, ie there is no point.

The only real use to an adjustable FPR is to get maybe 10-20% more flow out of injectors without swapping them for something larger. In that case you must retune the car anyway, so set it to the standard base + whatever % you need and tune it from there.

Link to comment
https://www.sau.com.au/forums/topic/398778-fuel-reg/#findComment-6730604
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...