Jump to content
SAU Community

Recommended Posts

Hey guys,

Looking for some advice and am unsure who or where to ask. I have a new job starting next year in Hawthorn and need to find a place to live. My girlfriend who I plan on moving in with also works in Carlton.

She can reach her work from the CBD easily by catching a tram, but cannot drive. I can drive to mine (parking provided) or catch the train and get off at Tooronga station, but it involves a bit of a walk. Neither of us have any experience with inner city peak hour traffic, apart from the fact trains are shit and unreliable.

Does anyone have any recommendations on which suburbs we should be looking at? We were considering:

Richmond: Its located right between the two, Tooronga station is on that line and my gf can easily get into the city. However I have been told by my parents who lived there 15years ago that traffic is horrendous in the morning - I can only imagine its worse now.

South Yarra: Benefit here is I can jump onto the Monash OUTbound and get off at Toorak road. How bad is the traffic outbound on the Monash in the mornings (and inbound in the afternoons), and how bad is it around South Yarra/Toorak Rd?

CBD: Biggest con here is we would have no car, which is a great money saver but could prove annoying.

Carlton: This is her idea. She walks to work, which admittedly would save a lot of money and I drive to Hawthorn. How difficult would this be in the morning? I imagine it would not be worth the effort.

Any other ideas would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/401103-melbourne-peak-hour-traffic/
Share on other sites

man...i did the commute from pakenham to docklands and pakenham to laurimar for nearly a year (after which I called it quits)....and I tell you something, if you can leave the car at home and walk to work or catch train/tram - that would be ideal. Outbound on the Monash is pretty good in the mornings because everyone else is going inbound, but either way when you get onto the main streets you will probably find traffic builds up again. Its really a no win situation when it comes to traffic, unless you catch the train or tram....

your not going to get a perfect answer, either way someone is going to be put out.

Imo, these are the best 2 options:

1. if you can reduce your reliance of traffic/public transport - ie a short tram ride/drive and then walk/push bike, that will be the best outcome.

2. or if one of you can completely eliminate traffic/public transport and the other has to drive that will be good too.

I live 31kms from my work on St kilda road, its an hour by car in the morning and an hour & 10mins on the way back. by public transport its an hour and 15 each way + alot of sick dirty people crammed next to you.

You have no choice but to get used to it.

I don't ever drive to the city, but I take the train every day as I work there. The traffic is also seasonal, during sunny days the traffic will generally flow at a pretty decent pace. But at the slightest sign of rain and even more especially so, during rain showers, the traffic will come to a standstill and all of a sudden EVERYBODY suddenly forgets how to drive and they all forget about the existence of road rules.

People are strange.

I highly recommend the public transport system over driving through and around the city, it might have its multitude of faults, but at least it's cheap(ish) and always available for you. Although on that note, f**k Metro! :P

Richmond, Collingwood and Fitzroy would be cheapest that's close to Carlton and better access to Hawthorn, but these areas are shady and not safe. Carlton North, Fitzroy North, Clifton Hill and Abbotsford are the same case, but slightly better.

i drove to st kilda rd from gladstone park every day for a good few years

not only does it take the same time or longer than public transport, but it costs probably 4x more

train zone 1 / zone 2 daily is - $240 a month

or

drive etag - $8 a day ? - $176

fuel - $176 (est $40 a week)

car park - $264

so you can see the difference. the main problem with traffic is every car has 1 person in it.

public transport is fine and v cost effective vs driving

Being someone who has lived in quite a few different areas around melbourne, here is my experience.

Pakenham to Carlton (5 years). Train is the cheapest and probably longest (time wise) solution. If you want to drive from the south east be prepared for a freaking early start and $$$. Fuel plus Etag which is $7 each way and parking on top of that gets expensive.

Ringwood to Carlton for 9 months, train was the cheapest and the eastern freeway is not so bad until you need to get onto 'kunt' road

Werribee to Melbourne and now Richmond the fastest and cheapest way is driving providing you can get cheap or free private parking

If I was you I'd catch a tram from Carlton/Brunswick way and get a train straight to hawthorn from melbourne central (city loop). Zone one ticket all day costs f**k all and you dont have to drive. That part of the city is also full of great food and the cbd isnt too far either. Living Hawthorn way will be really expensive too.

Hey guys,

Looking for some advice and am unsure who or where to ask. I have a new job starting next year in Hawthorn and need to find a place to live. My girlfriend who I plan on moving in with also works in Carlton.

She can reach her work from the CBD easily by catching a tram, but cannot drive. I can drive to mine (parking provided) or catch the train and get off at Tooronga station, but it involves a bit of a walk. Neither of us have any experience with inner city peak hour traffic, apart from the fact trains are shit and unreliable.

Does anyone have any recommendations on which suburbs we should be looking at? We were considering:

Richmond: Its located right between the two, Tooronga station is on that line and my gf can easily get into the city. However I have been told by my parents who lived there 15years ago that traffic is horrendous in the morning - I can only imagine its worse now.

South Yarra: Benefit here is I can jump onto the Monash OUTbound and get off at Toorak road. How bad is the traffic outbound on the Monash in the mornings (and inbound in the afternoons), and how bad is it around South Yarra/Toorak Rd?

CBD: Biggest con here is we would have no car, which is a great money saver but could prove annoying.

Carlton: This is her idea. She walks to work, which admittedly would save a lot of money and I drive to Hawthorn. How difficult would this be in the morning? I imagine it would not be worth the effort.

Any other ideas would be greatly appreciated.

Lol.. of course it is her idea.....but honestly carlton to hawthorn wouldnt be too bad once you figure a few backroads..My other choice would probably be richmond..theres some nice new apartments up around there too..pricey though..

peak hour traffic is never fun, but there is always a way around it if you plan ahead..Once you know your area Its no worse in the city than it is coming to Frankston from the city every night..

But the CBD at 5pm weekdays is a f**king nightmare......make sure you get out of there by 4pm or just stay around and have a beer till 7pm

Of course it is, but if you wanna be a sheep you'll get stuck in the herd..

Street directory is your friend, navman is your enemy..

For eg a job I do from Fitzroy to footscray in peak hour , 4.30 pickup. It used to take me an hour..I can now knock it over in 25 minutes..Intact I think I could get from Hawthorn to any of those suburbs listed in 20-30 min regardless of traffic..

What kinda clothing do you have to wear at work?

Business, business casual, casual?

If it's anything but business, you could look at doing your Ps and buying a bike.

Otherwise plan to use public transport,not your car, to get to work.

I'd look at Richmond or Prahran. They are close and would be great places to live if you're looking for inner suburbs/city. Also consider Carlton, Collingwood, Brunswick because you can easily jump a tram and train and get to Hawthorn in 30 minutes. Pushies are also a great way to get around in the city and inner suburbs.

Personally, if I were in your situation, I'd be looking at Prarhan. I like it's light alternative vibe and it's bloody close to the city.

what's teh route? i'd like a route from cbd to burwood 25mins in peak hr.

Where in CBD..Swanson st Uni?? .

from there I'd be looking at something like, Albert St > Barkers rd > Mont Albert Rd.> Elgar Rd

or if you can get on the freeway >High st >Warrigul would be quickest way, but getting on the freeway can be a nightmare, especially if your at the north end of the CBD ..You could actually find it quicker heading to footscray rd or montague st and going through the tunnel, but that will cost you a full toll

ah. the lygon/alexander pde intersection. is where i usually park for school.

i usually just get on alexander pde then get on the easten then exit at middleborough, which is a little less crowded than elgar.

but that takes me about 40mins to an hour. give or take

Yeah your pretty much screwed from there..you could try Johnston or Gertrude st but its probably not going to be alot quicker..

then again the Eastern is shocker at that time so it's worth a try. Of you keep going the sane route everyday your never going to find out if there's a better one..

Page 44-46 in the melways...study it and try something different ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...