Jump to content
SAU Community

Recommended Posts

This is a heads up from Carbon Car Systems Blacktown; not just to anyone in Sydney but Australia-wide.

After the 1st of July, the W/s cost of air cond gasses will be going north by anything up to 600%.

If you were thinking of holding off until summer to regas your system, think again!

Link to comment
https://www.sau.com.au/forums/topic/403368-air-cond-regassing/
Share on other sites

So, previously, what was it, $70-100?

$600 to regas?

Portable aircon and an inverter would be less.

Can then also remove the aircon system, weight saving bonus.

Any reason Terry?

Govt making it harder due to hazzard?

The gas used by Skylines (and many other cars) is "R134A"

So when current stock of that is used up by your supplier Simon, the cost of a regas at the moment which might be say $95 will go up to around $150.

The breakdown of the above, is part labour - part gas cost.

There will be a different substitute refrigerant available in late 2013.

Cost to be advised...

Story's been on the news.

The Carbox Tax genius' have worked out it takes "X" tons of Co2 to make a Kg of refrigerant gas, so the gas industry has to pay.

Guess who picks up that tag.

Yeah...

Do you have any idea about the next new refrigerant yet "G", in regard to....

a) cost?

b) efficiency?

I received some word that it was going to be less efficient than R134A, but that's just heresay.

I'm out of touch with these new gases Terry, but next time I'm dead keen to try Hychill in the 32's older system.

Trouble seems to be finding a fridge tech. out in the sticks who's willing to give it a try.

However I can remember when R22 and R12 got shafted. Exposed commercial freezer units had their gas stolen and sold black market style.

I'm certain these crazy gas prices will start this practice all over again.

Ah thanks for clarification Terry.

Can anyone explain why we need to regas a closed system?

There's plenty of potential refrigerant leaks in any car's aircon system.

First off would be the shaft seal at the compresor. It's a carbon/carbon seal plus a conventional fla seal but over time it's going to leak.

This is why you're asked to run the aircon for a short time every day, to keep the carbon seal lubed and happy.

The seal has to hold static gas pressure (approx 75psi) when the syetem is at rest and then down into vacuum when the system is loaded.

Next are the flexible hoses at the compressor. They're swaged over a hose barb but any gas will still leak slightly.

And finally the gas will permeate through the actual hose material over time.

All removable connections are flare metal/metal or "O" ring and are very trouble free.

The compressor in your domestic fridge is inside a sealed unit, there's no flex/rubber hose and all pipe connections are silver soldered.

The refrigerant in one of those will be there until something mechanical fails.

Hi Guys,

After the 30th of June 2012 I would presume any refrigerant that is CO2 depleting will go up in price I would presume. This is because of the Carbon Tax.

I would also presume a lot of other industries that are emissions heavy will also be charging more for their services such as Transport etc.

Kind Regards,

Daniel

Carbon

There's plenty of potential refrigerant leaks in any car's aircon system.

First off would be the shaft seal at the compresor. It's a carbon/carbon seal plus a conventional fla seal but over time it's going to leak.

This is why you're asked to run the aircon for a short time every day, to keep the carbon seal lubed and happy.

The seal has to hold static gas pressure (approx 75psi) when the syetem is at rest and then down into vacuum when the system is loaded.

Next are the flexible hoses at the compressor. They're swaged over a hose barb but any gas will still leak slightly.

And finally the gas will permeate through the actual hose material over time.

All removable connections are flare metal/metal or "O" ring and are very trouble free.

The compressor in your domestic fridge is inside a sealed unit, there's no flex/rubber hose and all pipe connections are silver soldered.

The refrigerant in one of those will be there until something mechanical fails.

Thanks for the info.

I was never told to run it every day.

I will now though.

So are there any other gases we can use in aircon/refrigerator systems?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...