Jump to content
SAU Community

Recommended Posts

  • Replies 182
  • Created
  • Last Reply

Top Posters In This Topic

Just the bushes, replace all the main ones with SuperPro or if you want as stiff as possible Nolathane.

If you really want stiff, I think Ironpaw has a set of Silk Road Coilovers with a higher spring rate.

Don't know what the rear subframe looks like on yours, but I've got adjustable toe arms with pillow ball mounts and camber correction bolts.

I like prefer my car stiff as possible. Less people get in it because of this fact . Plus it handles better than the already great handling when i bought it. So is there anything

If I want less people in the car; I just let fluffy off the chain.

I like prefer my car stiff as possible. Less people get in it because of this fact . Plus it handles better than the already great handling when i bought it. So is there anything

Personal preference is one thing, but facts are another. Stiff does not equal good handling. There is much more too it that just cranking up your coilover damper rate.

Personal preference is one thing, but facts are another. Stiff does not equal good handling. There is much more too it that just cranking up your coilover damper rate.

if it was just a matter of "as hard as possible for the best handling" then we'd be paying 1000's for concrete blocks.

I like prefer my car stiff as possible. Less people get in it because of this fact . Plus it handles better than the already great handling when i bought it. So is there anything

but didnt you say your biggest problem was having the rear wheel lift up and lose traction when trying to get into your steep driveway? making things stiffer will mean youll be parking in the street...

ive got no bracing, and yet i can still hear the pillars creak when i try to get over my driveway gutter

Edited by Deep Dish V35

Guys i'm just waiting on one more payment to clear and then we will order.....the list is below....if you think you have paid and are not on the list let be know ASAP or you will miss out.

This is the list of people who have paid so far.

For the delivery points if I don't know who you are I'm not sending the braces to you unless the other people in your state agree to change (and PM me) the delivery point you....sorry in advance to the QLD people.

VIC

IRONPAW (VIC)

Scotty NM35 (VIC)

Prince_skyline (VIC)

SydSyd (VIC)

NSW

WAGON BOY (NSW)

Mr 20Valve (NSW)

Howaitonaito (NSW)

Rosella (NSW)

Rudi ARX TURBO (NSW)

Daleo(NSW)

Jetwreck(NSW)

SA

impul535w (SA)

Bigkevracer (SA) - Please PM your address

Skipovalov (SA)

QLD

JoshM35 (QLD)

Commsman (QLD/NSW)- Please PM your address

Dcdc (QLD)

LineitUp (QLD)

R6n350GT (QLD)

NZ

0t1 (NZ) - Please PM your address

Edited by Jetwreck

Hi Craig, contrary to what Josh says (jokingly), I am not the best person to send the bars for Qld. Heck, I'm the only one on that list that doesn't live in Qld, lol.

I'll PM you my address as the last resort, but in the meantime I'm expecting someone in Brisvegas to put up their hand to take delivery :wave: .

I doubt everyone will be keen for a road trip to Byron. :no:

Craig,

thanks for getting the GB organised. These things are often a pain to deal with, & time consuming, and I'm sure all us guys appreciate the work you've put into it. :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...