Jump to content
SAU Community

Recommended Posts

I've been looking into exhaust manifolds to hi-mount a hypergear or t67 kando seems 6boost are the best along with the other higher priced items

Has anyone used the cheaper manifolds please tell me about ur experiance. ( I've read the internets for days. some work some break)

Surly anything is better then the standard manifold.

I've seen these advertised, What are your opinions on the below

Just jap racing manifold

http://justjap.com/s...&cat=274&page=1

Slide industries manifold

http://www.ebay.com....=item3a74d06a31

Autobahn88 manifold

http://www.ebay.com....1&_qi=RTM839190

Hybrid performance

http://www.skylinesa...y-aug-specials/

the list goes on and on, If there is better ones please show me

What should I do, Would like not to spend $1000+ on a manifold. But if all the cheapies are truely crap. I will just use standard factory manifold.

If using the factory rb25det manifold is there any heat issues or any problems. When bolting on a larger turbine

Link to comment
https://www.sau.com.au/forums/topic/409270-cheaper-turbo-manifolds-i-know-sigh/
Share on other sites

Pretty sure there is a thread in here on those NZ manifold etc.... May be of some use to you..... I went 6Boost as i wanted a reliable proven performer! Very happy with quality and excellent service!

Read hypergear thread from 296 and on wards:

http://www.skylinesaustralia.com/forums/topic/261613-hypergear-hiflow-service-continued/page__st__5900

They've tested out the fully bored out and remade stock manifold against a $1300 steam pipe manifold plus manifold with external gate. Expansive manifold made a difference.

Would be interesting to see tests vs something like the NZ Hybrid Performance manifolds...

If I were going cheap, I'd probably go with Hybrid to be honest. Purely because of his thread on here, it's good to see a business willing to take criticism on board as well as posting developments. That said, when I get a high mount manifold, I won't be going cheap. The poor man pays twice.

Hey mate, you're probably going to hear this alot and you'll probably hate it but you're better off saving and getting yourself either a 6boost or equivilant manifold.

It's not so much about the power gains (if any, as some may argue) but whether the manifold will hold up and resist cracking/fracturing. The cost of buying a cheaper manifold and having it crack, and then the cost of labour to remove and either fix or purchase a new one, will outweigh the cost of getting a slightly more expensive one in the first place.

True that the cheaper one may be equal quality against a more expensive item, it's kind of a hit-and-miss sort of deal.

I run a 6Boost high-mount manifold and cannot fault it, so that's what I would reccommend :)

Would be interesting to see tests vs something like the NZ Hybrid Performance manifolds...

If I were going cheap, I'd probably go with Hybrid to be honest. Purely because of his thread on here, it's good to see a business willing to take criticism on board as well as posting developments. That said, when I get a high mount manifold, I won't be going cheap. The poor man pays twice.

Best advice :cheers:

They are all pretty much rubbish. They will crack and warp and you'll be paying to have it removed and fixed in less than a year.

Get a CRG, 6Boost or ETM manifold.

We use CRG for our manifolds and they are only $1100 or $1150 with EGT ports. Same quality as the 6boost manifolds and cnc machined collector as well.

Impressive to see the following and reputation a good manifold (or any product i guess) will get if its done right! Hanaldo nailed it with that quote too :)

Does CRG have a website?

No he used to but was getting smashed with work so he deals direct through us and a couple of other places mostly.

my google searches come up with nothing at all

CRG Manifolds - 0420 613 662

I would avoid calling him over the weekend as it's his birthday and he may or may not have groovy ladies all up in his biz right now. That is unconfirmed though.

Everyone is welcome to send him an sms wishing him happy birthday though. He will appreciate the thought

Check Brae auto fabrications manifolds. I'm using one and it performed well on couple of different turbochargers.

also check drifthovc (Abe2) he's got a steam pipe manifold made with merged collectors for $600.

Hypergear...

I saw you are a selling a hks cast manifold.

Any chance of fitting a kando t67 on it or your ATR43-g3?

I got a hks cast manifold off a mate but thinking of selling to run a brae manifold due to what I have heard about them.

Running rb25 in 180sx.

Yes the G3, SS1PU or SS2 sits on in the HKS manifold fine.Its pretty hard to install if you are trying to do it with engine in the chassis. Also very tight clearance between the turbo to engine mount and drain port.

The Brae manifold can be either high , low or side mount to stock position, I would prefer the side mount as they makes the power fine and nothing else needs to be changed.

Engine is out as I'm painting car ATM.

I have heard of some turbos on the hks manifold causing people to trim the engine mount.

If i was to run a G3 or similar turbo would the gains be worth the price of a brae manifold taking in mind I have the hks manifold and got it for virtually nothing or do you think sell and upgrade?

Cheers.

Yes if you run a 4inch intake you will need to trim the engine mount. But I can machine the comp housing down to 3inch instead of 4. How ever it is still recommended to trim the engine mount and run a 4inch induction pipe.

Since the engine is out, installation would be easy. I would just use the HKS manifold. I'm sure the end result would be similar or better to other aftermarket manifolds.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...