Jump to content
SAU Community

Recommended Posts

I don't think anyone credible has ever said it CANNOT hold over 300.

I do believe that it has been said it can be used for up to 300kw applications. I think thats a reasonable comment.

Reasons:

Above 300kw there would definitely be markable gains from a quality manifold.

E85 is a game changer because it makes for a cooler burn (alcohol) and therefore counteracts the restriction of the stock manifold to a certain degree.

So I guess the BS is that the stock mani cannot hold much more than 300rwkw.. :whistling:

now, now..hold your horses...i first thought this aswell, and yes one of my mates has made 350rwkw on a 3076 56T .63 at 17psi on e85 atm, still has some left in it

stock mani with gate of exhaust housing

I first thought it was a octane issue on 98 that capped things at 300 with that frame of turbo..stao said no its the manifold..well

we are both right..it is octane limited to around that mark on 98 with a a stocky, but change to aftermarket and you can add some timing due to no restriction and pick up a very good handful of kilowatts

E85 is a game changer..it has so much octane that you reach mbt with the timing curve with those turbos whether you use use

a restrictive manifold or not and still have plenty in reserve..it woudn't suprise me if there wasn't much difference is peak power between

a aftermarket or stock in that scenario..i think my mate will try a nz hybrid mani soon so will be interesting to see the difference or how

the curve is changed

cheers

darren

Edited by jet_r31

glad i have a stock manifold now, got pulled over by cops this morning and they had a good look under the bonnet, was shitting myself... an aftermarket manifold would not of helped.

Heads up, for people thinking about buying the new Hybrid low mount manifold (no wg).

This is a good quality manifold for the price but it won't fit your rb25 motor without modification - studs, washers, nuts and bov/intake piping.

I bought it because it's based on the HPI design which is bolt on, but that's not the case.

I've contacted Kam a few times now to address issues, but unfortunately there's reluctance to change the design, so I may be out of pocket.

For now I'm back to stock manifold.

Cheers.

Heads up, for people thinking about buying the new Hybrid low mount manifold (no wg).

This is a good quality manifold for the price but it won't fit your rb25 motor without modification - studs, washers, nuts and bov/intake piping.

I bought it because it's based on the HPI design which is bolt on, but that's not the case.

I've contacted Kam a few times now to address issues, but unfortunately there's reluctance to change the design, so I may be out of pocket.

For now I'm back to stock manifold.

Cheers.

I am not sure if you know how hard it is to make a manifold out of mild steel, it is not as easy as making it out of Stainless steel where you can bend easily,

There are so many tight bends to look at and getting everything to line up with the std position of the turbo,

Having to trim a couple of studs and using 2 washers slightly smaller in diameter is not a mission, this is a custom made manifold it took me 2 weeks to do it for you and to make it look and perform well, having to modify the couple of things which is only trimming the 2 studs and modifying the bov return line is nothing major, as any one would know when dealing with any after market product you will have to make some changes and these are minor,

I have emailed you back every time you sent me an email and even offered to sort something out, if i don't reply in 5 minutes i am not ignoring you i do have things to do as well,

kind of frustrating having to deal with this kind of stuff specially when trying to do something good for some one you still end up getting biten and loose your time making something.

Yes it's frustrating but not many people will want to change so many things to get it to work.

I'm not biting you, what you thinks needs to be done, workshops will charge a $%^load to fix, studs and piping.

If it takes more time to get manifold to bolt on and you feel confident this is worthwhile, as I've said privately I'd be happy to purchase another manifold.

I'll be taking up your offer for the refund, minus postage.

Cheers.

  • 1 month later...
  • 11 months later...

Hi Just thought i'd give these guys at Hybrid performance the benefit of the doubt with regards to their manifold and guess what

its a piece of S#!t that is built poorly...i even asked if i can get a refund and KAM said no refunds look on the website lol

His stuff is cheap and the quality is crap

Save yourself the trouble and buy well known and trusted brands

Hybrid Performance is a scammer and should be banned from SAU for trying to sell its products

I actually should have spent my money on a on a stainless steel one

Hmm, my Hybrid top mount bolted up with no issues. I did modify the wastegate port slightly but that was due to me obessive complusive disorder with my car, i wanted it a few CM further away from aircon lines

mines seen about 5 track days with 320 rwkw with no issuse except a bit of loose dag in the manifold which i removed with dremel. wil see how the manifold handles 350 with e85

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
    • FYI: Racebox RE7R Custom Tunes Released!   https://goracebox.com/.../2017-infiniti-q50-q60-re7r-tcm...   FOR GEN 2 (21+) VEHICLES, PLEASE SEE NOTE AT BOTTOM See more   But whomever tuned your car is the tuner you should go back to, AMS, Sonictune or BT Tune....
×
×
  • Create New...