Jump to content
SAU Community

Ethanol For My Ride On Mower?

AngryRB

By AngryRB,
in General Automotive Discussion

 Share

Recommended Posts

AngryRB Grand Master

AngryRB

Posted
Posted (edited)

searched and couldnt find answer i wanted..

So what would happen if i used ethanol in the Cox ride on mower, i know its not knock limited etc, but it would sure smell alot better and maybe run bit smoother.. and keep the internals cleaner? nothing worse than smelling toxic exhaust fumes when your wippersnipping or mowing..

what you guys think?

Edited by SliverS2
Link to comment
https://www.sau.com.au/forums/topic/410400-ethanol-for-my-ride-on-mower/
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

4 stroke is fine, you would need to drill the carby jet out a little, then it could work. 2 strokes require castor oil to be mixed in also.

It will loose power though unless you strap a turbo on the side. (or up the compression) :)

AngryRB Grand Master

AngryRB

Posted
  • Author
Posted (edited)

whats the worst that can happen? will it just stall or run weak if its lean or will i damage the internals? as long as it doesnt loose much it would be better than smelling petrol ..

Edited by SliverS2
scotty nm35 Grand Master

scotty nm35

Posted
Posted

how much would i raise the comp to make this work well you think? would shaving the head about 1mm off do the job?

If it is a side valve head you need to shave it on an angle, or the valves will hit.

Just need to drill the jet out to 30% larger and it will probably run fine. Without drilling the jet it will die quickly. (if you can even start it.) I was always too scared to ruin my trusty Honda.

PN-Mad Grand Master

PN-Mad

Posted
Posted

Lol.

No, no, no!

Petrol only bro, not even 10% ethanol.

Reason being, parts of the carbs in these machines are made of plastic and diaphragms made of rubber. Ethanol reacts badly with these components, causing in the case of the plastic, warping. This in turn breaks seals, and will cause the machine to not run properly. Classic case is the Briggs sprint motors. Warps the plastic carb on top of the tank, causes an air leak that in turn makes the machine run rich, and foul.

Tally so far, ive fixed 4 neighbours and friends mowers from this problem.

iamhe77 Grand Master

iamhe77

Posted
Posted

Lol.

No, no, no!

Petrol only bro, not even 10% ethanol.

Reason being, parts of the carbs in these machines are made of plastic and diaphragms made of rubber. Ethanol reacts badly with these components, causing in the case of the plastic, warping. This in turn breaks seals, and will cause the machine to not run properly. Classic case is the Briggs sprint motors. Warps the plastic carb on top of the tank, causes an air leak that in turn makes the machine run rich, and foul.

Tally so far, ive fixed 4 neighbours and friends mowers from this problem.

Alex, whilst it is not a Cox mower, 10% ethanol blend is recommended in the manual for my Kubota.

Briggs suck dirty arse though so I wouldn't be surprised if that happened on unleaded either :P

PN-Mad Grand Master

PN-Mad

Posted
Posted

Yup, agree b and s are dirty arse suckers. But they have also been round a long time and make a successful product. Your k-pop lawn mower probably has the internals and lines to deal with ethanol. Would I run it? Nope. Plus, you gotta work out what your saving, when you can just get 91 a few cents more expensive. The service and carb clean n refresh will be significantly more expensive!

AngryRB Grand Master

AngryRB

Posted
  • Author
Posted

yeah i guess its not really worth doing then, i like the idea of having a cleaner smelling machine thats possibly a bit smoother and cleaner internally.. but i dont want to risk damaging it cause it runs well enough for my purposes.. its a 12hp b and s so upping compression would of also possibly given it an extra horse or two..if i was lucky..

PN-Mad Grand Master

PN-Mad

Posted
Posted

yeah i guess its not really worth doing then, i like the idea of having a cleaner smelling machine thats possibly a bit smoother and cleaner internally.. but i dont want to risk damaging it cause it runs well enough for my purposes.. its a 12hp b and s so upping compression would of also possibly given it an extra horse or two..if i was lucky..

Generally if your actually planning to muck round with this thing, they are heavily restricted on the intake and exhaust side. They are also rev limited. That'll be where to look. Not internally. But it's a ride on......

A friend of mine has a Haltech on his jetski lol

I'd believe it, some of those have more technology than road cars these days!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      RB20DE NEO smallbox clutch.

      By Duncan · Posted

      yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Duncan
      NC MX5

      By Duncan · Posted

      Quite right, if you make it to that pension you deserve every cent
    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • MBS206
      RB20DE NEO smallbox clutch.

      By MBS206 · Posted

      From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...