Jump to content
SAU Community

Recommended Posts

I have been testing a few of my bypass kits out on my car, Cam's PM35 and a turbo V35, all showing good results. Hopefully Cam can add his logging data to the thread later.

It consists essentially of a hose connecting the block to the coolant return line back to the radiator via the heater hose. I decided to fix the air bleeding issue at the same time, with a ball valve for easy filling and purging. I was hoping to make up some funnels to screw into the ball valve also but they aren't really required. The pushlock fittings aren't cheap and I still need to get quotes for the laser cut alloy block plates so I have no firm pricing as yet, but I need to gauge interest as I don't want to get many more than I need cut.

From my testing this kit makes filling the coolant simple, just top up the radiator, start the car, then fill through the ball valve. One closed it seals the system but allows simple air bleeding as required.

It allows more coolant to circulate through the radiator, keeping temps much more stable. I have done a few track days recently and although the temps rose it was much less than I would usually see, and the stock radiator I am using was coping well. (shame the gearbox didn't stay as cool.) On the dyno the coolant temps were more stable and when pushed it would rise, then drop back to normal straight away making the tuner more confident with multiple high power runs. I feel a larger radiator would still help keep the track temps under more control.

Here are a few instal pics, the hose will require heat shielding from the exhaust as you can see.

post-63525-0-19752600-1349448718_thumb.jpg

post-63525-0-35233700-1349448738_thumb.jpg

post-63525-0-40611300-1349448759_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/410876-m35-coolant-bypass-kit/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

I know you lot don't take me seriously lol.. But this is seriously something a lot of you should be getting on to. Especially after seeing what the little bottle like thing looks like on the head..

I know you lot don't take me seriously lol.. But this is seriously something a lot of you should be getting on to. Especially after seeing what the little bottle like thing looks like on the head..

And you sell it so well.

Why did you have a bottle on your head?

No timeframe as I have no time. lol.

I need to get the plates laser cut, once that is done the rest is fairly straightforward to make. I might do a small run of 10 for now and see how I go. I'm guessing around the $250 mark for the complete kit, hopefully less if I can get some better pricing. Obviously buying in bulk would be smarter too. Anyone got contacts at proflow? :)

No timeframe as I have no time. lol.

Tease! :nyaanyaa:

I need to get the plates laser cut, once that is done the rest is fairly straightforward to make. I might do a small run of 10 for now and see how I go. I'm guessing around the $250 mark for the complete kit, hopefully less if I can get some better pricing. Obviously buying in bulk would be smarter too. Anyone got contacts at proflow? :)

Sounds fine, I'm down for one. Let me know when you've worked out firm pricing etc. Good chance to chuck in the Nismo thermostat at the same time.

The Nismo thermostat is a 5 minute job, this kit will take a few hours Ryan. The injector rail and lower plenum will have to come off. Not a difficult job but time consuming.

I can make one and send it over if you want it soon, I think I have enough parts. Are you able to take some pics and write up an install guide to help out the other guys? I can work you through it on the phone.

Didn't Cam take enough photos for install guide?

The time it takes to complete the job is rewarded, coolant temps are very stable and the fact that you don't have to tip your car upside down to bleed the cooling system makes it worthwhile

I might do a small run of 10 for now and see how I go. I'm guessing around the $250 mark for the complete kit, hopefully less if I can get some better pricing. Obviously buying in bulk would be smarter too. Anyone got contacts at proflow? :)

Check out http://www.anfittingsdirect.com/index.php. I had a quick look & couldn't see weld on fittings, but maybe there is a way around by being creative? Prices look good compared to other suppliers & a decent order (for 10 people) should only add $5 for each person.

N/A if they don't have the bits you need, but possible source for other projects perhaps.

They only seem to sell teflon hose connections Leon, I have this hose but it is more expensive and also not very flexible. It also has a lower recommended heat rating. I think the rubber hose with pushlock fittings is a better way to go.

They only seem to sell teflon hose connections Leon, I have this hose but it is more expensive and also not very flexible. It also has a lower recommended heat rating. I think the rubber hose with pushlock fittings is a better way to go.

I agree, rubber hose is better for this situation. Sorry, I didn't look very hard at what they sold.

Edited by Commsman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...