Jump to content
SAU Community

Recommended Posts

http://www.sau.com.au/forums/topic/84208-wheel-sizes-offsets-for-skylines/?p=7471653

Above is what I've got atm 18x9.5 +15 with 265/35/18 stock suspension, no work done, just liners out

sitting pretty high up in space atm...

  • Like 1
  • 2 weeks later...

Looks awesome driven over a bump yet

Does racing around a track and running over apexes count?

Actually the front right very slighty rubbed on the screw holding in the inner lining of the front drivers side. I bent it up with my hand (good old ally guards) and she was sweet :)

  • Like 1

Would have though there would be epic guard v tyre at the rear

Nah I tested it before I took it out, got 3/4mm clearance to the rolled guards under compression (jacked it up front front corners). Plus add some tyre deflection under cornering would add a few more mm clearance

So had a fairly big week last week with the car, went down to No Limits and broke my lap record for a street car with a 60.19 which is within 1 sec of the best qualifying time the Group-A cars did back when they were racing. Also so close to a 59sec lap which would be a huge barrier for a street car.

natsoft%20no%20limits_zpspsgubd7n.jpg

Also managed to take out the latest round of the State Speed Event Series which I don't think has ever been done before in a registered car, let alone a closed car. The competition in this is significantly better than your average time attack so I was very happy with the overall and class win

natsoft%20speed%20event_zpsaupdowjh.jpg

IMAG0488_zpsxqvndafi.jpg

Edited by SimonR32
  • Like 2
  • 2 weeks later...
  • 1 month later...

Any more action lately? I havent been able to stalk with no updates :P

Well did round 7 of the State and came first, one round left and I've almost got it in the bag. Have to come in top 15 to win the series (worst I've come in the dry is 2nd).

Also did Powercruise on the weekend, first year I have not broken the car which was good and managed to come 2nd in off street drags. Lost to a 32GTR with 3.4L GTX42, Holinger and ET Streets

Edited by SimonR32
  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...