Jump to content
SAU Community

Max Amps Pulled From Battery / Cable Gauge Required To Relocate Battery To Boot


Recommended Posts

I searched for a DIY guide on relocating the battery to the boot, and surprisingly couldn't find anything!

Can anyone advise on the minimum cable gauge required to relocate the battery to the boot? I have a heap of 8AWG cable (61Amp capable) which I realise is probably not going to be sufficient, but I am just wondering if I run 2 of the lines if it will be enough?

Cheers :cheers:

Justin

depending on the quality of the cable i recommend 2awg as a minimum preferably larger,

i measure a starter on a v6 commodore 160amps on cranking. which has lower compression so i assume less work would be needed to crank.

Cheer's for the responses :no: Looks like even 2 x my 8AWG wire is not going to cut it!!!

I think I will leave the battery relocation for another time.

2ga is more than plenty, it is also the same as the -ve line from a mig welder. Hit up BOC gas and just buy some welding cables, works out cheaper than 2ga audio cable :)

My Gtr had the battery relocated to boot, used 2gauge cable, never have a problem with voltage drop or any other electrical problems (apparently these cars are voltage sensitive)

6 Cyl Starter motors usually draw between 200-400 amps. No amplifier wire is going to cut it. You need minimum 2 gauge battery/starter cable. It's about $10/m at repco from memory

6 Cyl Starter motors usually draw between 200-400 amps. No amplifier wire is going to cut it. You need minimum 2 gauge battery/starter cable. It's about $10/m at repco from memory

welding cable works out a tad cheaper if you have a trade account :)

Also don't forget your starter motor will draw more current in winter and also when the battery is lower in voltage. You need to account for these factors so you don't catch things on fire. Safety first :)

I used 0 gauge audio cable. And I ran both earth and positive. I didn't want to earth though the body. U can't go wrong with over earthing.

Cost alil bit, but I hate wiring probs so I just over killed it so there won't b issues.

  • 4 weeks later...

What are people using for distribution blocks once they have relocated the battery? Having a bit of a look at options for such things at the moment.

stereo components really.. you just need a good ANL fuse & holder that that's it.. don't waste your time with anything else :)

What are people using for distribution blocks once they have relocated the battery? Having a bit of a look at options for such things at the moment.

Custom made...

Neutral bar with stand offs in a jiffy box.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • How many of you guys run the synchro os giken set and at what power? Do you then also use the billet plate?  How is it launching with it, any dragy times from 0-60? 60ft?
    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
×
×
  • Create New...