Jump to content
SAU Community

Recommended Posts

Sorry to crash thread but i'm trying to find some quick answers without starting a new topic. I have an R33 GTS-T with a GCG Highflow turbo (XTRGTST). What power range could I excpect to get out of it?

http://www.gcg.com.au/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=337&category_id=34&option=com_virtuemart&Itemid=101

ok so i cant wait for the ol' 30 to be built, i have got my walbro e85 fuel pump and my injectors will be here next week then its off to Jez to get this happening

should all be done in the next few weeks so il post up the results...

Has jez touched you your car yet?

Yes he did....it felt good he said

For some reason it was running out of fuel, wasn't the injectors coz they were at 75%,

Made about 360ish at wheels.....we did see more then 370 though

Gotta run a few tanks of ethanol through it, change the filters/clean the fuel filter sock and go back to make sure everything is 100%

Huge difference in torque and thrust lol

  • 1 year later...

What tends to break on these at this power level? Do they normally just spin a big end or do they throw a rod out the side of the block haha?

Im running a 35r at the moment with just over 500hp and was thinking about changing to e85 for a bit more but a bit unsure if its going to hold

up to the extra power or not and what will break if it doesnt.

e85 would allow you to run a much smaller turbo for similar power levels, making the car much more responsive and faster overall.

Who knows what will break and when, but at least there will be no DET which is what usually kills motors, built or stock.

Ethanol will give you more torque, but the way the power is released during the stroke should help with longevity, and your exhaust temps should be around 200c lower also. The only real downside is less K's to the tank.

So do you personally think it's worth pulling the motor out just to do the same oiling mods that you did and chucking in some new head studs and head gasket?

Haha your recent results Simon was what inspired me to put mine on e85

If you are prepared to build the motor but want to try and get away without you can always try.

Whilst the motor is good for the power in described trim you should bear in mind that the longevity of the motor is also largely dependent on condition and the life up to that point. Much like tests on SR20s, lots of people kill them at 200kw and then others have tested them to 400.

Be it myself I would stay within the known constraints but would boost it till it blows. However I would be prepared to replace the motor should it grenade.

GL and keep up posted :)

Yeah i have the mindset that I'll have to build the motor eventually and to be honest the car really doesn't see a real hard life. Simon you did oil pump gears and bigger sump if i remember correctly? Did you change these yourself?

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
×
×
  • Create New...