Jump to content
SAU Community

Recommended Posts

Hey guys,

this is a thread to share updates on mods and work you've been doing on your V-Series.

I'll kick it off.

Fitted a BlackVue DR400G-HD2 Camera to my car - living in Melbourne I've had 3 cars vandalised in the past 10 years. Using motion sensors, this camera will record video activity sequences that go on around my car when it's parked. It also records video and audio when you're driving, including speed and exact GPS location - both features which would come very much in hand if you have to file or dispute an insurance claim. Coupled to an alarm and immobiliser, it just helps me sleep at night a little easier :thumbsup:

http://www.autoblackbox.com.au/index.php?route=product/product&product_id=83

84370925_1_644x461_videoregistrator-blackvue-dr400g-hd-ii-versiya-2-16gb-novyy-sankt-peterburg.jpg

gshack_BlackVue_Install-021-620x250.jpg

That's really cool, great idea.

Well for me, not so much what i've done today but what i am doing on the weekend is an oil change and brake fluid change. Then hopefully in 2-3 weeks time i'll be purchasing my new CD009 gearbox clutch & flywheel and i'm pretty damn excited for that!

This week.

k'n'n drop in's

Removed nissan badge from the boot.

Professional detail and polish removing tar and metal flakes and leather treatment.

Tinting and 4 new goodyear directional 5's

Target now is to get the cart paid of then full stainless invidea exhaust and kinetix cats.

I pumped up my front left Tyre!

Well, not to amazing, however I only knew the front ,left was low because a few weeks ago i "installed" a tyredog remote pressure sensors. I bought it on eBay, and wish I had had it a few months earlier. I lost pressure in my front right, and didn't realise till a few KM's later. Enough to put a big dent in the rim, basically forcing me to get new rims (expensive). If anyone was hesitating about getting this, I would say go-ahead. Its a simple "install", you simply put on these special valve caps put a battery in and your away. It was interesting to see that the Tyredog was showing 27psi and the digital pump at the station also said 27psi.

bought a VLSD out of a 350Z to replace the 3.3 open in my 250GT, having it shimmed and installed maybe get a nismo finned diff housing.. getting a transmission fluid change, engine oil and filter change and having the brakes adjusted.

I replaced my engine oil last night, so difficult when my car is low as f*ck had to drive the car up on bits of wood to fit the jack in..

Still need to change the filter, i didn't end up finishing the change until about 7:30 last night and i was tired as f*ck so i thought i'd do it next oil change.

Is it normal for my car to use 1L of engine oil in about 7,000km?

Yeh , Sean I'd go grab a set of those $100 ramps from Repco, the ones with the lowered car extensions - the standard ones are useless for a lowered car.

Safety first, bro. I have done some stupid sh1t working under cars in the past, and been very lucky a couple of times.

I don't take risks anymore after a friend of mine's husband had his car fall on him in his garage - she didn't find him for a couple of hours - but they are pretty confident he was killed instantly.

I'll add it to the wish list Mat, I had the front of the car on chassis stands so i don't believe it was very risky but i do understand what you are saying. I do get nervous every now and then about that sort of shit happening.

That's horrible to hear, i can't imagine that sight.

But in response to my question before, i have used just over 1L of oil in around 7,000km.. i have heard some of the motors in the states were recalled for bad oil consumption. Is this something to worry about?

Edited by Seano350GT

Because i had a big day yesterday i was buggered, changed the oil and couldn't be bothered f*cking around trying to take the filter off because of it's position and the sump cover in the way so i put it in the too hard basket until probably this weekend.

Nice nuts Mat.

Sean, we give to strife because we can.

I get the car on ramps, take off cover, move tray under sump, remove plug, try to catch plug, remove filter and go have a smoke. That usually does it. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...