Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
  • 1 month later...

Been following this thread on and off for years. And reading the chassis developments makes me feel alot. Sympathy that its happenex to a car youve put alot of time and effort into. Aswell as dread a Nd panic for my on gtr. Makes me want to run outside and check every inch of mine

  • 2 weeks later...

Been following this thread on and off for years. And reading the chassis developments makes me feel alot. Sympathy that its happenex to a car youve put alot of time and effort into. Aswell as dread a Nd panic for my on gtr. Makes me want to run outside and check every inch of mine

Well my case is quite bad to the point that I don't think its safe driving it - hence the decision to part with it. These are old cars now just gotta maintain them even more. Restorations and rebuilds are almost inevitable now if you want to keep the car in good nick.

ants - any tips on removing side skirts and not screwing up the clips, need to paint mine up

clips are easily replaceable and cheap as chips - I found that using WD40 on the adhesive made it loose without ruining the paint and use plastic scrapers. Just ensure you clean up the WD40 after you have removed the adhesive bond.

Yeah he is. He already started.

this is accurate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...