Jump to content
SAU Community

Recommended Posts

As we know the R32 N1s did not come fitted with a stereo. (It may have been an option?)

Can anyone with a N1 confirm if the wiring for a head unit or speaker is present in the factory loom or not?

As we know the R32 N1s did not come fitted with a stereo. (It may have been an option?)

Can anyone with a N1 confirm if the wiring for a head unit or speaker is present in the factory loom or not?

most of the boyz here that have a genuine N1 actually have the radio optioned in. So, I doubt you will find your answer here.

I think there is a fellow on the GTR Canada forum that has one without the radio, but not sure if hes on there anymore.

Working in the automotive industry - I can say that wiring looms are complex items and it is often easier to have one loom with empty connectors then different looms for different grades of the same car.......

I for one would be surprised if they made a different wiring loom for the N1 - considering that at the point in the line where the cars are modified (no rear windscreen wiper, A/C etc.) the loom would already be in the car. Also it would be virtually impossible to provide a different loom for those N1's were no radio was optioned (comparedf to N1's with radio optioned in).

I'd be 99.99% certain the connectors exist.

Cheers

The not 100% though Baron

Working in the automotive industry - I can say that wiring looms are complex items and it is often easier to have one loom with empty connectors then different looms for different grades of the same car.......

I for one would be surprised if they made a different wiring loom for the N1 - considering that at the point in the line where the cars are modified (no rear windscreen wiper, A/C etc.) the loom would already be in the car. Also it would be virtually impossible to provide a different loom for those N1's were no radio was optioned (comparedf to N1's with radio optioned in).

I'd be 99.99% certain the connectors exist.

Cheers

The not 100% though Baron

This is true. Other than a few extra loops of tape to secure the extra wiring, a few clips and blank receptacles for the connectors to seat into, the loom is identical.

Regards, Auto Electrician and N1 owner Adrian :)

Here is a pic of the wiring in my N1 that i took on the weekend. SO it looks like at least my N1 has factory stereo wiring. I cannot confirm or deny if my car came with a stereo or not, as when i got it, it had an aftermarket head deck in it.

R32 GTR N1 Stereo Wiring

Working in the automotive industry - I can say that wiring looms are complex items and it is often easier to have one loom with empty connectors then different looms for different grades of the same car.......

I for one would be surprised if they made a different wiring loom for the N1 - considering that at the point in the line where the cars are modified (no rear windscreen wiper, A/C etc.) the loom would already be in the car. Also it would be virtually impossible to provide a different loom for those N1's were no radio was optioned (comparedf to N1's with radio optioned in).

I'd be 99.99% certain the connectors exist.

Cheers

The not 100% though Baron

This is true. Other than a few extra loops of tape to secure the extra wiring, a few clips and blank receptacles for the connectors to seat into, the loom is identical.

Regards, Auto Electrician and N1 owner Adrian :)

Here is a pic of the wiring in my N1 that i took on the weekend. SO it looks like at least my N1 has factory stereo wiring. I cannot confirm or deny if my car came with a stereo or not, as when i got it, it had an aftermarket head deck in it.

Thanks fellas. Good practical logic going on there.

I think we can conclude that all BNR32 looms are the same irrelevant of model variant. At least from factory anyway.

  • 2 weeks later...

Hello All,

I'm back after the mishap at SAU trackday..... managed to get my hands on a black R32 GTR V-Spec. I'll post some pics soon once I get the blue slip sorted out. Car has just over 70,000km on the clock.

Chassis: BNR32300254

Model: KBNR32RBFS AA

  • Like 2

Hello All,

I'm back after the mishap at SAU trackday..... managed to get my hands on a black R32 GTR V-Spec. I'll post some pics soon once I get the blue slip sorted out. Car has just over 70,000km on the clock.

Chassis: BNR32300254

Model: KBNR32RBFS AA

Is that the QLD car?

If so, it was for sale for ever but looked a great buy.

Could never work out why it didn't sell until now.

Where are you located? We need a V-Spec get together in Sydney!

Bob.

Hey Bob,

yep...its the one from QLD. It took a while to sell as I was getting a few mates to check the car out for me. Wanted to make sure everything was good.

I'm in Peakhurst Heights. We spoke briefly at the 25th Anniversary.

Definitely keen for a V-Spec meet up.

No worries. There was a dark coloured V-Spec or V-Spec II on Carsales in Queensland when I bought mine a couple of years ago. REALLY NICE. The owner had spent a bit replacing worn bits.

Always wondered what happened to it.

No worries. There was a dark coloured V-Spec or V-Spec II on Carsales in Queensland when I bought mine a couple of years ago. REALLY NICE. The owner had spent a bit replacing worn bits.

Always wondered what happened to it.

was that the 93 VSpecI for about $36K??

I seem to remember one being on there for ages.......

Hello All,

I'm back after the mishap at SAU trackday..... managed to get my hands on a black R32 GTR V-Spec. I'll post some pics soon once I get the blue slip sorted out. Car has just over 70,000km on the clock.

Chassis: BNR32300254

Model: KBNR32RBFS AA

Sorted out the blue slip and rego, washed and polished the car, changed over the rims and installed the lower side skirts. AC belt snapped due to tensioner bearing failing....still drivable though

PB092908.jpg

PB092910.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It’s new. It’s the cd009. I did take the transmission apart to mill down the bellhousing and had both housings come off the gears so wondering is something isn’t in right. I am running redline. I can get it in gear running too but it’s just not easier and it’s almost like 2, 4, 6, and reverse all the back gears aren’t happy going in
    • I’ll remember that as a last choice. It’s brand new
    • Got keys and did a walk around the yard planning the landscaping works with the family that I will be doing Main effort: remove all the woodchip in the gardens that are around (attached) to the outside of the house and replace with 10mm blue metal, having woodchip close to the house is a recipe for inviting white ants, currently there are no white ants within the block and I would like to keep it that way I'll be buying some large raised garden beds to grow veggies and stuff, and the woodchip will be mulched with everything else that gets dug up, pulled out, or cut down during works Next will some minor drainage and landscaping maintenance up one side of the house, where the fuse box, AC, and solar stuff will go, about 12 mtrs long by 2 meters wide, I'll break up the soil, add gypsum and then I'll dig in a French drains about 300mm deep x 300mm wide and fill it with agg pipe and blue metal, then level out the whole area with a 50mm layer of blue metal, the soil, whilst currently pretty compacted, will break up well with the gypsum to aid in drainage, I'll then cover the area with a 50mm layer of more blue metal In saying this, the drainage issue is minor, but that little hidden away area down the side is untidy and weedy, and as all of the main elec stuff is there I want it neat and tidy to appease my OCD Again, the material excavated from the French drains with be added to the garden bed mulch, as will some rose bushes and some other crap looking garden plants, and a old apricot tree that is looking worse for wear The apricot tree is currently in a little roundish garden bed that is in the middle of the back yard with few other crappy looking plants around it, that will all be removed, levelled, re-turfed, and is a perfect spot for a hills hoist There is also a area about 3m x 2m between the rear fence and shed that will get some attention, it looks like some stuff was stored there and the grass is dead, that will also get broken up and mulched, and is a prime spot for a pumpkin patch I've guestimated that I'll need: 3 tonnes of blue metal, 12 meters of agg pipe, 5kg of Gypsum, and a hills hoist, so a few bags of concrete as well to set it in place (the house currently has one of those pull out 4 line jobs, whilst it works, I want a retro old school hills hoist), I am also going to run some chickens, there's a great spot for a coop, so a chicken coop to suit 4 of those lovely egg laying bitches will also be on the job card That should keep me busy for a while, and will finish off the back yard ready for a early spring planting of some veggies and berries  Once the main effort is done I'll start out the front, there's a large rock garden that could use some TLC, but that is only minor works Should be fully moved in within 2 weeks, the landscaping works will start then Fun times, retirement is good  
    • It happens, that's what your single stage filler is used for.  If it is still visible after the 3 coats of 2k primer, it will be visible after the paint is laid down.  Its hard to give 100% perfect advice without being there in person, I'm very tempted to say stop where you are, fill your pin holes with a single stage putty first then keep going. 
    • New or used transmission? Alignment will be the same with engine running or not. If new, i'm presuming it's a clutch release bearing size issue. If used, are you certain it's a CD009/A and not an older CD008 or less? They had known synchro issues. In my opinion, these transmissions should always be purchased new, they're dirt cheap and you avoid dealing with old revisions. 
×
×
  • Create New...