Jump to content
SAU Community

Recommended Posts

hi guys,

im new to the forum so this would be my first post.

I am currently 17 and not too far off of getting my p's, I have a general love for my skylines especially the r34 4 door gtr. I have been set on an r32 gts-t 4 door for a while now seeing as the laws have changed to nearlly the same as queensland's here in victoria. The Vicroads website states that:

"If your probationary licence was issued on or after 1 July 2007, you can drive some lower performance turbocharged or supercharged vehicles. The definition of a lower performance turbocharged or supercharged vehicle is a vehicle with six cylinders or less that is:

  • turbocharged or supercharged with a power to weight ratio of less than 100kW per tonne
  • turbocharged or supercharged with a power to weight ratio between 100kW and 125kW per tonne and that is considered to be a family type vehicle (four seats or more) rather than a sports type vehicle. A family type vehicle is a sedan, station wagon or hatch normally used to carry families/passengers with four or more seats and is equipped with child restraint anchorages. A family type vehicle does not include a sports car (two door coupe)."

Now... i got a phone call this morning from a lady from vicroads exemptions. She basically assumed i was some dick head p plater who just wants a fully sick turbo. She was rude and was set on telling me no i could not drive a 4 door r32 gts-t. I am confused because the r32 gts-t weighs 1,300kgs and makes 158rwk. 158/1300 = 121kw/tonne which falls bellow what vicroads states is required to drive a 4 door turbo charged vehicle. She said i can apply for an exemption aslong as i have some sort of "un-due hardship" that requires me to drive this vehicle. I wanted the gts-t so that i didnt have to sell it as soon as i was off my p's, Not to mention the n/a models cost more. I am tempted to send another letter and hopefully get someone a little more polite and not as ignorent to call me back. Ive heard of people applying for exemptions for the gts-t without undue hardship and just stateing that it falls below what the vicroads website states. Have any of you guys done this? im just looking for some solid info because as much as i love the gts-t im not going to risk my license to drive it.

thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/417002-r32-gts-t-on-p-plates-in-victoria/
Share on other sites

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

Now... i got a phone call this morning from a lady from vicroads exemptions. She basically assumed i was some dick head p plater who just wants a fully sick turbo.

Is this not the case? Seems to me the basis for your entire argument is that you're going to be a P plater and you want a turbocharged car for it...

A Skyline is seen as a sports car, whether it has 4 seats or 4 doors or whatever. You won't get it through on exemption. This rule was introduced primarily so P platers could drive turbo diesel vehicles due to the increasing supply and demand of economical and low emissions passenger vehicles from Europe in Australia. It was not introduced to give P players wanting a faster car on their Ps, some slack. They are talking turbo diesel golfs and supercharged/turbo petrol Polos/Colts, not slower model sports cars.

Stick with an N/A Skyline and save for your next car for when you're off your Ps. Or, if you want to go fast on your Ps, get a motorbike - nothing you can drive on your Ps will be faster.

I want to be able to go down to the track and have some fun. Im not looking at going 300km/h down the high way.

thankyou for your input though i appreciate it.

Nothing wrong with an N/A 32 or 33 then, plenty of P Platers on SAU attend DECA in these cars.

I want to be able to go down to the track and have some fun. Im not looking at going 300km/h down the high way.

thankyou for your input though i appreciate it.

So get an N/A Skyline and do that. Crawl before you walk, you'll be better for it.

In any case, if your goal is track work, then you can buy a turbocharged track car and a cheap daily that can tow it around. You can drive a turbocharged race car on your Ps, but I suspect that's not what you actually want to do. Maybe you forget that we were 17 once too...

Get a Holden Volt! I test drove one and the dealer told me to drag one of their workshop guys who was in a HSV commie. I got off the line and up to 80 four out of five times. I only lost one because someone changed lanes. I'm working out if the monies can get me one. ;)

You don't need to make a new thread for every new question you have you know....

http://www.skylinesa...-out-their-ass/

http://www.skylinesa...wd-rocket-ship/

And btw, better to be honest and say you want a car that has some go then say the vicroads lady thought you were just a p plater wanting a turbo because infact you do and right now you are looking at alternatives to get that. Guys on here will see through it in a second.

Alot of members here were/are in your position.

Money factor - paying more for an N/A can't help you but I was in the same position as you, wanting a turbo, we had power to weight laws back in the days(6 years ago :P) . Got an N/A - the exact model in you are talking about in "R33 2door 4WD N/A rocket ship" stock it is a ship - think titanic.

In the end I choose to modify what I had, happy with the outcome, but I can say the N/A skyline in stock form is very relaible and easy to drive - a good car for a p plater to learn in and looks decent.

As everyone is saying, just get an N/A if you want a skyline. Even if you get a turbo, as you said, it's 20 years old and a high chance of being tired/thrashed, not saying an N/A wouldn't either but theres generally more mechanical issues with turbos so there's more money you have to spend to get it running correctly.

You don't need to make a new thread for every new question you have you know....

http://www.skylinesa...-out-their-ass/

http://www.skylinesa...wd-rocket-ship/

And btw, better to be honest and say you want a car that has some go then say the vicroads lady thought you were just a p plater wanting a turbo because infact you do and right now you are looking at alternatives to get that. Guys on here will see through it in a second.

Alot of members here were/are in your position.

Money factor - paying more for an N/A can't help you but I was in the same position as you, wanting a turbo, we had power to weight laws back in the days(6 years ago :P) . Got an N/A - the exact model in you are talking about in "R33 2door 4WD N/A rocket ship" stock it is a ship - think titanic.

In the end I choose to modify what I had, happy with the outcome, but I can say the N/A skyline in stock form is very relaible and easy to drive - a good car for a p plater to learn in and looks decent.

As everyone is saying, just get an N/A if you want a skyline. Even if you get a turbo, as you said, it's 20 years old and a high chance of being tired/thrashed, not saying an N/A wouldn't either but theres generally more mechanical issues with turbos so there's more money you have to spend to get it running correctly.

thanks for the advise mate :) il take that onboard.

I'll sell you my R34 GT if you want. I drove it on my P's and it was a lot of fun. Comes with 4" tip, silencer and stock exhaust.

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-snc6/9434_200608705032_5677924_n.jpg

PM if interested =)

Otherwise, my advice as a former P Plater trying to drive a turbo with exemptions.... dont bother wasting your time trying, it doesn't work with any excuse you give. So don't be picky with a car, just find something you can learn and practice with. I started off with a Rover:

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/483902_10151166992730033_1341078381_n.jpg

Practice makes perfect right?

I drove an N/A 4 door R34 on the last 1.5 year's of my P's and regret it, After reflecting on it i wish i bought a cheap 4 cylinder car that was cheap to maintain and got me from home to uni/work with little money spent on petrol.

As soon as i was off my P's i was thinking of getting a 34 GTT, i eventually ended up buying one sooner than i thought because my n/a 34 got stolen outside my house.

I think there are some main points you should think about (many of which people have stated)

- Police attention (even if it's N/A) trust me...

- Doesn't sound like you will be allowed legally to driver a turbo model on your P's

- More expensive on service/parts and fuel than your common 4 banger

- If you get an N/A theres a good chance you will want to sell it and get a gtst as soon as you're off your P's

I'm sure theres more dude... But i just know if i didn't buy mine i would have had more money to spend on going out with mates etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...