Jump to content
SAU Community

Recommended Posts

  • Replies 347
  • Created
  • Last Reply

Top Posters In This Topic

there is nothing wrong with the aussie 6's. i've owned a few over the years and they are nice to drive, go well and are cheap to run/maintain. i currently have a vt wagon that i drive 130kms a day to and from work. it's about to click over 260,000kms. i've done 60,000kms in the 2 years i've owned it. hasn't missed a beat other than the aircon needing regassing, and when i busted a clip on the fuel filter (my fault not the cars)

ive got 10 grand saved up. Could buy an N/A liner or xr6 and just wait i gues.

if you dont have a turbo then you need some cubes, atleast 3L's and somthing not too heavy

personally id go somthing cheap until i could get a turbo, some options - EL tickford fairmont, 3L supra, VL calais, VS/VX calias,

and id have some fun with basic mods and the drags

As everyone has previously said, yes NA Skylines are slower than a wet week and will get dusted in a straight line by pretty much everything on the road. If i had to abide by P Platers rules I would buy a BA/BF XR6. Alot quicker in a straight line than an NA Skyline (R32-R34). They also give standard/Mildly modded gtst's a run for their money. They also handle pretty damn good too...

However, I have owned an R34 25gt for over 5 years, I took it on many drift days and with the right modifications (2way Diff and coilovers) it was fine. It was no smoke machine but I was still able to link corners with no trouble.

I eventually saw the light and did an engine conversion

As everyone has previously said, yes NA Skylines are slower than a wet week and will get dusted in a straight line by pretty much everything on the road. If i had to abide by P Platers rules I would buy a BA/BF XR6. Alot quicker in a straight line than an NA Skyline (R32-R34). They also give standard/Mildly modded gtst's a run for their money. They also handle pretty damn good too...

However, I have owned an R34 25gt for over 5 years, I took it on many drift days and with the right modifications (2way Diff and coilovers) it was fine. It was no smoke machine but I was still able to link corners with no trouble.

I eventually saw the light and did an engine conversion

thats impressive man, props.

i think and xr6 will be the way to go. Atleast until im off my p's

+1 for the XR6 (or SV6).

Cheap, fast in a straight line, comfortable for road trips, and it won't attract as much unwanted attention. Safer too, and it'll help prepare you for the fuel bill of a turbo when you're off your P's. :yes:

The big back seat could come in handy too...

If you could find one with a decent injected LPG system, that would be even better.

Edited by BuuBox

25 na for daily driving goes not bad, not quick though, bang per buck is prob what people are talking about, hate to say it but in that position i'd prob go for the xr6 or sv6 too :whistling:

If you want to go fast in a straight line go and buy and te tf cortina and mod the hell out of the 250 xflow.... Fastest P Plate car IMO

(But DEFINETLY not as comfy as the formerly mentioned xr6, but low 13s are achievable for not a huge investment)

Don't understand all the hate on na's. I've found mine to be pretty much even with other p plater cars. Compared to a mates vy it's only a tad slower in a straight line but once were in the twisties I leave him for dead. Straight line speed isn't as fun as cornering speed imo.

Also on the cop issue I never got pulled over once in a year of driving around except once where I was stupid and deserved

Don't understand all the hate on na's. I've found mine to be pretty much even with other p plater cars. Compared to a mates vy it's only a tad slower in a straight line but once were in the twisties I leave him for dead. Straight line speed isn't as fun as cornering speed imo.

Also on the cop issue I never got pulled over once in a year of driving except once where I was stupid and deserved it

Edited by drunkn snail

Don't understand all the hate on na's. I've found mine to be pretty much even with other p plater cars. Compared to a mates vy it's only a tad slower in a straight line but once were in the twisties I leave him for dead. Straight line speed isn't as fun as cornering speed imo.

Also on the cop issue I never got pulled over once in a year of driving except once where I was stupid and deserved it

With coilovers yes they Handel well...

With coilovers yes they Handel well...

Mine with unknown lowered suspension still feels like it handles well enough. Wouldn't coilovers be too stiff for mountain roads considering there bumpy as shit unless on something like the black spur

i had a mate at a tyre shop get me some new shocks for my 180sx i used to have. he got me a set of coilovers of a mate of his and put them in (no idea on spring rate, but my guess is that it was high). 2 days later i had him remove them and get me some normal shocks to use with my springs. going around a rough corner just up the road from home at normal speed (about 40kmh) i started to bounce onto the wrong side of the road. i had to go round the corner 15kmh an hour slower than normal to stay on the right side of the road. realistically speaking, the max speed i could go round that corner without losing control with the coil overs was about 35kmh. with the stock shocks and normal lowered springs would've been about 65kmh. everytime i see people in s13's, etc bouncing around on relatively smooth roads i always wonder whether they just bought the suspension because they had just seen it used on a car in a magazine or some pro drift car and have no idea about suspension (which is usually the case).

I just helped my cousin put coilovers in his 32 today, I told him when he bought them that 14kg was way to hard for street but he knew better...or he does now after trying to drive over a mountain today and giving up because it was un-drivable.

i had a mate at a tyre shop get me some new shocks for my 180sx i used to have. he got me a set of coilovers of a mate of his and put them in (no idea on spring rate, but my guess is that it was high). 2 days later i had him remove them and get me some normal shocks to use with my springs. going around a rough corner just up the road from home at normal speed (about 40kmh) i started to bounce onto the wrong side of the road. i had to go round the corner 15kmh an hour slower than normal to stay on the right side of the road. realistically speaking, the max speed i could go round that corner without losing control with the coil overs was about 35kmh. with the stock shocks and normal lowered springs would've been about 65kmh. everytime i see people in s13's, etc bouncing around on relatively smooth roads i always wonder whether they just bought the suspension because they had just seen it used on a car in a magazine or some pro drift car and have no idea about suspension (which is usually the case).

They were prob bad coilovers, I've had HSD, BC sports and teins before and they have all been fine on the street, no bouncing. Depending on who put them in maybe they were on the bump stops? That would cause very bad handling, Ive seen it before where guys lower the spring platform instead of the base of the coilover (some dont have this though) and you basically sit on the bump stops.

For a street car you dont need anymore then 6-8kg springs in a skyline, no point going stiffer.

definitely wasn't sitting on bump stops as they were set up pretty high (i'm not one of those people who have the tyres scrubbing on the guards, i like my cars practical). he knew what he was doing. they were simply too stiff. i should point out that this was about 8 years ago now, so the range of coilovers around back then was much smaller, and these were an ordinary set even back then. my mate wasn't overly happy with them even before he put them in, so he wasn't too fussed when i got him to take them out.

definitely wasn't sitting on bump stops as they were set up pretty high (i'm not one of those people who have the tyres scrubbing on the guards, i like my cars practical). he knew what he was doing. they were simply too stiff. i should point out that this was about 8 years ago now, so the range of coilovers around back then was much smaller, and these were an ordinary set even back then. my mate wasn't overly happy with them even before he put them in, so he wasn't too fussed when i got him to take them out.

sounds like my teins, hahaha.. must be 10kgs or more, i bounce around a little but when i bought them i had no idea what was what.. lol

I just helped my cousin put coilovers in his 32 today, I told him when he bought them that 14kg was way to hard for street but he knew better...or he does now after trying to drive over a mountain today and giving up because it was un-drivable.

14!haha, the ve sv6 i had handled well too for it's size, it was fairly thirsty for a daily, and had the 'system malfunction' warning coming up when sold it :whistling:

Edited by WMDC35

Mine with unknown lowered suspension still feels like it handles well enough. Wouldn't coilovers be too stiff for mountain roads considering there bumpy as shit unless on something like the black spur

I run tien ha coilovers in mine and have them set to back breaking stiffness. Down a mountain pass it was every bit as quick as my mates turbos.... But coming back up was a different story

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
×
×
  • Create New...