Jump to content
SAU Community

Recommended Posts

need a lil help guys, was driving the gtr just cruising at 60 changed gears nice n slow n I felt a funny twitch in the clutch pedal and then next time I pushed the clutch is was a lot heavier all of sudden.

pulled over check the fluid levels all looks ok, then I noticed when I got back in it every time I pushed the clutch it was making a noise like gas escaping. This was in the car not under the bonnet.

so I hear this is possibly a vacuum leak in the booster? anyone got any other ideas?

anyways I drove it home and it felt fine aside from the weird noise and being heavier clutch than normal, went into gear fine no crunch.

What im wondering is, is this doing any damage to the clutch? I have the nismo coppermix twinplate so I don’t wanna stuff it up but its normally light as a feather and id actually prefer a heavier clutch pedal.

o and this car is starting to p me off

Edited by Inline 6

Sounds like a throw out bearing... Or more likely a split in the clutch vacuum booster pot steel casing...

Check and see if the noise is coming from the clutch pedal pivot area.. With the pedal getting heavy though I would say that it is the booster...

I hope it is nothing worse than that...

:)

It's gotta be the booster Dan. If it was anything else it would be crunching/notching gears. I wouldn't expect it to be doing any damage to the clutch.

Edited by dark.sky

Get the standard one welded up strong, nismo one is standard with som tack welds to reinforce......

Yeah my mechanic took it out and seem welded it and put a strengthening plate as well... much cheaper than going aftermarket lol

G'day, looking for a little help/advice..

I've been out of the loop when it comes to parts prices and just wanted to know what you guys think. I'm looking to buy a r33 rip the motor and box and replace it with my built stuff. Question is; what are r33 s2 motors + boxes worth now days. Am I dreaming thinking I could get $3000 for both including loom and clutch? Are they still moving fairly quickly or are people not buying them? When I bought mine 4+ years ago, I paid $3500.. I want to know this before I buy the 33 so i know weather or not its a viable option..

Cheers!

Yeah as mentioned above ^^^ best bet is to call a couple of wreckers or import specialists wreckers a call and find out how much all that kit is worth these days. It will give you at least a ball park figure to work with.

Was driving today and this happened, its the left side bracket on a R33 GTR drivers seat. You might also notice it has been welded in 3 places by the previous owner haha. Anyone else had this happen to them?

SeatBracket-2.jpg

Also I swapped the passenger side bracket over to this so i can get around, anyone know if a gts seat will have the same bracket?

someone buy my old GTR and give it a good home;

http://www.gumtree.com.au/s-ad/ridgehaven/cars-vans-utes/nissan-skyline-r32-gt-r/1014576914

runs 10's:)

.. it's a shame YOU never ran a 10 in it :D :D :D

G'day, looking for a little help/advice..

I've been out of the loop when it comes to parts prices and just wanted to know what you guys think. I'm looking to buy a r33 rip the motor and box and replace it with my built stuff. Question is; what are r33 s2 motors + boxes worth now days. Am I dreaming thinking I could get $3000 for both including loom and clutch? Are they still moving fairly quickly or are people not buying them? When I bought mine 4+ years ago, I paid $3500.. I want to know this before I buy the 33 so i know weather or not its a viable option..

Cheers!

Pretty sure you are dreaming - RB26s can be had for that sort of money (I sold one on behalf of my brother-in-law for well under $3k 2 years ago). Generally RB25s hover around the $1,500-$2k mark - maybe a bit more incl. the loom, and if the clutch is decent. But you never know - selling 2nd hand parts is a funny business - sometimes you can barely give things away, and other times you could have sold a thing 10 times over for mor cash then you got.

Pretty sure you are dreaming - RB26s can be had for that sort of money (I sold one on behalf of my brother-in-law for well under $3k 2 years ago). Generally RB25s hover around the $1,500-$2k mark - maybe a bit more incl. the loom, and if the clutch is decent. But you never know - selling 2nd hand parts is a funny business - sometimes you can barely give things away, and other times you could have sold a thing 10 times over for mor cash then you got.

Yeh I was saying 3k with complete motor (inc. loom, clutch, everything) AND box. I think $1800 for engine and $1200 for box is fairly reasonable.

I know what you mean, I've sold plenty of parts and its just a matter of who wants what at the time. I remember when buying my 25, everyone wanted one. I got mine at $1900 and that was a steal!

Was driving today and this happened, its the left side bracket on a R33 GTR drivers seat. You might also notice it has been welded in 3 places by the previous owner haha. Anyone else had this happen to them?

SeatBracket-2.jpg

Also I swapped the passenger side bracket over to this so i can get around, anyone know if a gts seat will have the same bracket?

oh snap!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must me missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...