Jump to content
SAU Community

Recommended Posts

Anyone now someone who is missing a Black 180sx reg S843AVM....

It is parked outside my place and looks like it has been tampered with and dumped...

SAPOL said it has not been reported stolen but from everything I can see it looks like it has been.

need a lil help guys, was driving the gtr just cruising at 60 changed gears nice n slow n I felt a funny twitch in the clutch pedal and then next time I pushed the clutch is was a lot heavier all of sudden.

pulled over check the fluid levels all looks ok, then I noticed when I got back in it every time I pushed the clutch it was making a noise like gas escaping. This was in the car not under the bonnet.

so I hear this is possibly a vacuum leak in the booster? anyone got any other ideas?

anyways I drove it home and it felt fine aside from the weird noise and being heavier clutch than normal, went into gear fine no crunch.

What im wondering is, is this doing any damage to the clutch? I have the nismo coppermix twinplate so I don’t wanna stuff it up but its normally light as a feather and id actually prefer a heavier clutch pedal.

o and this car is starting to p me off

finally got it into a workshop and there tellling me its the thrust bearing is worn out and itll cost 550 in labour to rip the gbox out to replace it. they are suggesting i wait till the clutch is worn to replace it.

ive got no idea what the thurstbearing is, will it damage the clutch or make it wear out faster? it seems to feel alright other than the noise at the moment.

anyone know how much it is to rebuild a nismo twin plate anyways :P

Edited by Inline 6

I'd just leave it for the moment but $550 seems a bit too pricey for that type of work, it's a little brass "ring" worth about $3 from Nissan.

To rebuild a Nismo twin plate is about $900ish from NPC

Luke i think your thinking of the spigot bearing that sits in the end of the crank and the end of the input shaft runs inside it.

The thrust bearing is on the bearing that rides on you input shaft and it what pushes (or in the case of a pull type clutch, pull) the "fingers" on the clutch when you press your pedal.

Regardless both parts are worth bugger all but it is a gearbox out job so would there's a fair bit of labour involved.

I would take the mechanics recomendation and wait until your clutch is stuffed and do them together becasue the labour cost will be the same.

It won't damage anything but if you end up with a scretching noise when you press the pedal then the bearing has colapsed and you will then need to change it.

Having said that the symptoms that you have described don't sound like thrust bearing to me as that would have no effect on pedal feel.

Your thoughts about the clutch booster sound more on the money to me. The other thing it could be is a broken pivot point for your clutch leaver. I have had the same thing happen to my car and after month of not figuring out what it was eventualy (on an SAU cruise) i put my foot and the pedal and the clutch didn't engage which led an emergency pit stop at windies lookout. Ended up driving the car through the hills back to Campbelltown with no clutch which was a lesson in matching revs on gear change.

Edited by D_Stirls

if its not a daily driver ya could tear it apart, find the problem, fix/replace the part and whack it back together yourself.

it would be an educational experiance and you could get to know your car a little more in doing so, it would make for a fun and intresting weekend.

FYI my brother-in-law David (Red back on SAU) is running his R33GTR (with R34GTR Nur engine in it) at the Bathurst Motorsport Festival this weekend. FB group below if anyone want to check out pics/join.

https://www.facebook.com/groups/586460034705368/

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...