Jump to content
SAU Community

Recommended Posts

Needs more r31

c'mon man, even you don't have a 31 anymore! In fact, I think you might have come all the way to the mid nineties by now with an R33?

Does this car go as fast backwards as it does forwards?

It surely does, electric motor and one gear.....lets see a reverse slalom at the next texi :)

  • Like 1
  • 5 weeks later...

Very interesting idea for people wondering if a Leaf could work for their lifestyle; rent one for a week

http://cloud9cars.com.au/

Frankly, I'm enjoying spending $8per week on power instead of $80pw for petrol

  • 2 weeks later...

OK so serious performance mods last week....I've installed the LED kick plates (factory option, but not available in Oz)

from this grey plastic crappy-ness

led_front_before.jpg

to this super cool stainless LED rice-ness

led_front.jpg

Strangely, while the headlights and brake lights are LED, pretty much everything else were standard incandescent globes. I've changed them all across to LEDs too

I calculated the reduced current draw of 6 indicators, 2 parker lights, 2 number plate lights, and will save approximately f**k all power. But they do look better.

I have also got a lead on some decent lightweight wheels, and some other excellent Leaf mod news. But I don't think I should give that away until its sorted :bunny:

  • 3 months later...

ahhh I've been a bit slack updating this lately!

zero additional mods, the rims have been slow arriving and the secret squirrel change may not be possible which is a damn shame.

The car is driven daily and needs a charge every 2-3 days. I have a logger on the power circuit and this is what it is costing, average of $0.52 per day.

leaf40dayaverage.jpg

Also, the Leaf came first and second (Kel and I) in the June SAU motorkhana, so it is no slouch: http://saunsw.com.au/texikhana-10th-june-2013-times/

secret squirel mods???

Nismo option 'ecu'... ???

I've been hearing wispers that an a/m controller is currently being tested for tesla... if sucessfull, they're looking at other production ev's. There may be some hardware changes depending how far into it they get though... the leaf's pack and motor are apparently seriously under-utilized, but no one really know's the limmits of the factory inverter or wiring infrastructure yet.

$4 a week on fuel... awsome :-)

  • 2 weeks later...

Yep, I'd love to confirm the nismo ECU will work with the Oz delivered car.....still trying to confirm (initial answer was no :( ) I had heard the same about the motor being under rated, I'd be happy for some sort of "overboost" kind of idea with a temp cutoff for safety.

Also, the local branch of the Leaf club had a meet up on the weekend, a total of 7 cars and a round trip to the Entrance.

Doesn't sound like much for those with a refillable fuel tank, but getting a bunch of plug in cars that far and back took some logistics. And a long lunch at the club. The trip up the old pac was pretty much the same speed of the stagea cruise the month before though :)

leaf-meet2.jpg

Yep, I'd love to confirm the nismo ECU will work with the Oz delivered car.....still trying to confirm (initial answer was no :( ) I had heard the same about the motor being under rated, I'd be happy for some sort of "overboost" kind of idea with a temp cutoff for safety.Also, the local branch of the Leaf club had a meet up on the weekend, a total of 7 cars and a round trip to the Entrance.Doesn't sound like much for those with a refillable fuel tank, but getting a bunch of plug in cars that far and back took some logistics. And a long lunch at the club. The trip up the old pac was pretty much the same speed of the stagea cruise the month before though :)

So, you got stuck behind a Rav4 as well? :P

lol damn rav4s. and echidnas.

Justin the charging capacity limit is on the car side. It has 2 charging ports, the fast charger takes about 400v and charges the car in under an hour. However, Nissan recommend not fast charging frequently.

So that leaves the Level 1/2 charging port. The charger in the garage support 6.6kw/h but the Leaf's Onboard Charger Controller only allows 3.3kw/h. (The 2013 model upped that to 6.6kw/h but the retrofit is not at all simple.

The option I'm going to go for is adding a second charge controller as a slave to the standard one which will allow about 7kw/h total charging. A few guys in the states have them working but I'm not willing to go that far with a car with so much new technology until it is out of warranty.

Where is the line drawn for working on the electrical system? I realise you need to be a specialist electrical mechanic to work on these electric cars legally, how much can you actually do yourself?

ahhh I've been a bit slack updating this lately!

zero additional mods, the rims have been slow arriving and the secret squirrel change may not be possible which is a damn shame.

The car is driven daily and needs a charge every 2-3 days. I have a logger on the power circuit and this is what it is costing, average of $0.52 per day.

leaf40dayaverage.jpg

Also, the Leaf came first and second (Kel and I) in the June SAU motorkhana, so it is no slouch: http://saunsw.com.au/texikhana-10th-june-2013-times/

What kind of distances are you traveling? Terrain? Driving style (lead foot?).

Those 'fuel' like running costs are pretty impressive. Obviously excludes other running costs.

lol damn rav4s. and echidnas.

Justin the charging capacity limit is on the car side. It has 2 charging ports, the fast charger takes about 400v and charges the car in under an hour. However, Nissan recommend not fast charging frequently.

So that leaves the Level 1/2 charging port. The charger in the garage support 6.6kw/h but the Leaf's Onboard Charger Controller only allows 3.3kw/h. (The 2013 model upped that to 6.6kw/h but the retrofit is not at all simple.

The option I'm going to go for is adding a second charge controller as a slave to the standard one which will allow about 7kw/h total charging. A few guys in the states have them working but I'm not willing to go that far with a car with so much new technology until it is out of warranty.

I was thinking more along the lines of fast charging while out on the road (do aussie caravan parks have 3 phase/400v? they do in the US, so some of the EV guys plan they're road trips around stopping there for electrons). Depending where you are, most large marina's will have high capacity outlets for larger yachts/boats... Otherwise, just get everone to chip in and hire a large gen set for the day at your turnaround spot??

Orr... buy 4x honda generators and strap them to the roof racks?

All kidding aside, I want to see a solid EV tuning scene in Aus!

  • 3 months later...

sorry missed the responses here somehow....

Scotty not sure....but I do know I'm not a qualified mechanic for ICE cars either :) Nissan would no doubt tell you that you need specialist training and tools, but in practice the only high voltage stuff is charger inlet at front to charger under rear parcel shelf to batteries under floor to motor. Everything is very obvious, large orange cables, and there is a built in kill switch in the rear floor that disconnects the battery.

everything else is just normal mechanical stuff anyway.

Those running costs are for a 30klm daily round trip, plus whatever trips on the weekend - it's been excellent.

Justin the issue for charging on the road is not so much the available power but the actual charging unit. a fast charger runs to $20k plus so there is no business case to put one in. There are portable 15A or 10A (which comes with the car) but that means waiting for hours.

Have confirmed unfortunately through multiple sources that the nismo ECU is not an option or Aus spec cars....so will be waiting some time for the chance for more powah

10,000klm service this week, fixed price $89.12

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • They care about emissions, and cost the most. Save weight where possible, and make manufacturing easier. Less material also let's the engine transfer heat to water quicker, and bring the engine up to temp quicker, better for emissions and getting them past their warranty period.
    • I was under the impression the reason why OEMs are going with solutions like relatively thin "right-sized" cylinder walls with technologies like PTWA and open deck is because they care a lot about whatever marginal knock margin benefits they get from that vs the structural rigidity benefits of a closed deck block and thicker cylinder walls. I also see some weird stuff like plastic inserts in the water jacket around the cylinders to try and equalize cylinder wall temperatures. re: the PRP blocks and heads at the end of the day it's hard to know what is and isn't going to work there, just have to see what the initial buyers say about it.
    • Which is why I didn't mention that hardness testing, and specifically mentioned the bore and deck thickness testing. Yeah, not really. The bore temperature will be a lot more even around the top half inch or so, where the material distribution is dominated by the deck, and which is the only place where the bore surface temperature heating any gas in the cylinder is likely to have any effect on detonation. Think about it. Another inch or so down the bore, you might have a hotter spot. The gas there might get a bit hotter, then the piston rises squeezes that gas away from there at high speed and mixes it with other gas from nearby. Instant dilution of the problem. I'd be surprised if it was an issue at any time other than in racing engines or OEM dev engines being run at the ragged edge of tuning. Say what now?
    • https://dsportmag.com/the-tech/education/engine-tech-material-hardness-testing/ The PRP testing on block hardness I'm not sure how much it actually can be trusted. The thinner cylinder walls on RBs is a bit of a problem vs 2JZ but it really depends on the design goal. Siamesed cylinder bores like a 2JZ cause uneven cylinder wall temps too, which means a bit of distortion induced by that + the hotspot can affect knock margin. Something that actually gives me a bit of pause with the PRP block, whether super thick cylinder walls are going to keep it from being drop-in compatible on an otherwise OEM rebuild. 
    • Yeah very valid point. I am waiting for one of the other tuners to come back from vacation so he can help me a bit when the cat is installed again. In the meantime I am going to finish up my polishing and ceramic coating that I have started myself.    N45 Dr Beasley product is highly recommended for a paint primer / polisher. Using this EXO Gtechniq also for the ceramic but next time might use the light serum before hand also. Looks great. 
×
×
  • Create New...