Jump to content
SAU Community

V36 English Dash Cluster Conversion

MFC05

By MFC05,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

  • 3 weeks later...
Nightcrawler Grand Master

Nightcrawler

Posted
Posted

Yep it is red mate, and it has the touch screen Navi on the oem screen too - so I assumed you had a hand in it Chris. It is in Perth now - did you do it in Qld or did he fly you over? Also, did he get the km lined up, or are they out?

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

its a perth car. when I did it the car it was landed/complied in brisbane and modified here by me.

KM is correct. I had a local instrumentation shop reset it.

colin.ssc Mentor

colin.ssc

Posted
Posted

the car waas dropped off to me customer paid me money and I did stuff. :P

geez you're sure tight lip about everything :P.....if i get one in again, ill make sure it goes through Brisbane. Will call you if anything

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

look at it this way do you discuss what you do for a living in detail on a public forum :) ? I tend not to given most know that I work on these cars for a living and it how I pay my house loan and other expenses.

put simply - its doable and I can do it :P I will answer certain questions but how I do things is not one of them.

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

Ah that explains why you haven't replied to my emails chris. Are you saying that you want money to help someone?, you know my situation (i'm in NZ) how much $ would you need?

got busy actually . will send off a full quote once I get home to a pc. low mid 4 figure though.

t5iv Grand Master

t5iv

Posted
Posted

I think what a lot of us fail to realise is that Chris is an Auto Lecky by trade. It's what he does and what he enjoys doing. At the end of the day, he built his knowledge through years of servitude to the industry. He knows his stuff because in an industry fuelled by clients not wanting to pay decent dollars and companies offering crap services for minimal fees, the guys with the best knowledge and most innovative are the ones that stand out from the pack. He's a master of his trade and we can't just ask him for freebies. He built his intellectual property and shares a lot more info about what he does than most do about their day to day jobs. Let's give him a break eh?!

The Max Mentor

The Max

Posted
Posted

Well said, t5iv. People seem to fail to realise that not everyone here is just a general member of the public and/or enthusiast.

If someone doesn't want to divulge their secrets for whatever reason, be it on the basis of profession or just simply not wanting to tell, then respect it and do the same homework they've done. We all learn from experience so if you don't find the information you need, make an effort to figure out the information yourself. Grab schematics, find old junked out gear and if you're really ballsy, make carefully calculated tests with your own vehicle. If something breaks along the way, be sure to have the cash around to fix it. :)

Thankfully the firewall grommet ring that I broke only cost me $7 but I bought 2 just in case I'm an idiot for a second time. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...