Jump to content
SAU Community

Recommended Posts

Opinions needed!!

what do you think? would they look any good? (well better than r33 stockers anyway!!). The centre caps will be GONE, and replaced with...something..dunno what :)

I've heard they would fit ok being 5 stud, but does anyone know if it's a hassle?

ps. if anyone has some time on their hands and could photochop them onto a wine red r33, i will love you forever :) :)

1729_2mg.jpg

Link to comment
https://www.sau.com.au/forums/topic/42052-xr6-turbo-rims-on-an-r33/
Share on other sites

There is a few things to consider first PCD, offset, width. Having 5 holes is only 1 piece of the puzzle.

You should find some and try them on before you get any further into buying some. They might stick out of the guards or need big spacers. They might be too narrow for decent tyres at the back.

In general though I think they look pretty good. What do they look like without centre caps though? could ruin the whole idea.

could just replace the centrecaps with something generic most of the factory rims made for ford come from ROH so they may have some ROH caps or blank caps that will fit onto those rims.

i would be interested to see the results of the photo chop

:)

heres my attempt at a photochop pretty amateur but hope it gives you an idea of what it looks like :) sorry i couldnt find a good photo of a wine red skyline but you get the idea :headspin:

Hope the owner of the car in the photo doesnt mind that I put some falcoon rims on his ride :)

G'day Shell - I reckon they would look great.

One thing to think about is the size of the front brakes on the R33's are pretty big compared to a lot of other cars (4 spot brakes), so the off set may not clear them :)

Worth a try though :D And for the centre caps, you'd be able to make up a sticker to go over the 'ford' on them without an problems.

J

P.S. - I might have a set of R34 GTt rims for sale soon if my car is written off.... :)

thanx for the pic, mcnamg...they look pretty good!

I'm just soooo sick of the stock rims...and i'll be getting these for free (if my bf still goes ahead with upgrading his XR rims!!) And they'll be 17's too yay!

Jay, i would have thought the front brakes on the XR's would be pretty big?? but yeah, worth a shot anyway, it's no loss if they don't fit :(

  • 10 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...