Jump to content
SAU Community

Recommended Posts

  • Replies 214
  • Created
  • Last Reply

Top Posters In This Topic

leigh , work on your bench tecnique if you can for the next lifts. You need to practice changing the angles on your lift so you don't hurt your shoulders. Your vid shows there is lots of stress going onto the rotator cuff. Basically, see if you can take a slightly narrower grip and lower the weight in a slight arc to just below the nipples on the chest. Keep your shoulder blades retracted in the lift. It will feel initially weird but, give it a go and see if it helps.

leigh , work on your bench tecnique if you can for the next lifts. You need to practice changing the angles on your lift so you don't hurt your shoulders. Your vid shows there is lots of stress going onto the rotator cuff. Basically, see if you can take a slightly narrower grip and lower the weight in a slight arc to just below the nipples on the chest. Keep your shoulder blades retracted in the lift. It will feel initially weird but, give it a go and see if it helps.

cool i'll give it a go next time I'm at the gym cheers

leigh , work on your bench tecnique if you can for the next lifts. You need to practice changing the angles on your lift so you don't hurt your shoulders. Your vid shows there is lots of stress going onto the rotator cuff. Basically, see if you can take a slightly narrower grip and lower the weight in a slight arc to just below the nipples on the chest. Keep your shoulder blades retracted in the lift. It will feel initially weird but, give it a go and see if it helps.

Good advice!

Partner did 30 @50% bw today

lol she wins if you can put up a vid

Prolly should have made it 60%, as I read that females have 60% the upper body strength of males, but it wouldn't have made much difference. Well done to her!

lol she wins if you can put up a vid

Prolly should have made it 60%, as I read that females have 60% the upper body strength of males, but it wouldn't have made much difference. Well done to her!

Yes well I think the Kara's of this world make good exceptions for a level playing field ha ha... anyone bench 182kgs at 67kgs bodyweight?

She squats 275kg and deads 225kg.....ouch.

Edited by rev210

Yes well I think the Kara's of this world make good exceptions for a level playing field ha ha... anyone bench 182kgs at 67kgs bodyweight?

She squats 275kg and deads 225kg.

Come on Leesh and Charlie...lol

Farking...giving up on life now.

Slightly unimpressive deadlift? Only compared to the bench and squat...

You should throw up some before and after pics of weight loss in your thread (preferably Skyline window reflection). It's quite an achievement at your age (and gives me hope for the future lol).

on your suggestion I just posted in my thread on the build section. I don't have the skyline window tho' so they lack style.

Edited by rev210

Have John (SRS13)'s attempt ready to post, but we're having a bit of tricky trouble with emails and attachments not being forwarded at the moment. Should have it sorted tomorrow hopefully. Sorry John!

Have John (SRS13)'s attempt ready to post, but we're having a bit of tricky trouble with emails and attachments not being forwarded at the moment. Should have it sorted tomorrow hopefully. Sorry John!

No problems!

Sorry for the headache and thanks for helping out.

What was your bodyweight John? 80kg from memory?

Good form and solid reps throughout! Almost had the 19th...

SRS13

BW: 80kg

BP: 80kg x 18

http://www.youtube.com/watch?v=_irH8fbKbHs

Claim is useless without vid...post up Troy. 9 reps is nothing to sneeze at.

cbf recording it unless I know I'm in contention for the win :P I'm happy enough with 9 reps of bodyweight though, so I'm not entirely disappointed. Hopefully I can get it up to video-worthy level before end of month :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...