Jump to content
SAU Community

Recommended Posts

not warmup sets its progressive sets but it depends on what your goals are when it comes to deadlifts to whether or not you would go that way.

3x8-12 at the same weight doesnt seem progressive?

what goals would said workout be towards?

3x8-12 at the same weight doesnt seem progressive?

what goals would said workout be towards?

no 3x8 isnt progressive at all.....i ment if your setting 3x8 @ 100k thats where you would start off

so say if you are doing sets of 8 @ 100kg (max) then you would start at a precentage of that or even at max and do progressive increase

so start @ 1x 100kg add 2.5kg or 5kg or 10kg and continue with 1 rep. Obviously form is cruical here to increase 1RM and continue till failure so would be like this

1x100

1x110

1x120

1x130

1x135

1x140

1x142.5 (so max 1RM)

1x145 but fail

Then next week you would say start at 130kg and do it all over again

====

8 - 12 reps would would be heading into hypertrophy (building size) tho you would want to do 4sets

7x2 is also again different to both the above which is why it really depends on what you want to achieve

  • 2 weeks later...

Why not both?

90 x 10

110 x 10

140 x 7

155 x 4

Had no grip issues tonight, cooler weather = no sweat. Next sesh: 160 for reps.

Argh, been sick for the last two weeks and my gym loves to close for holidays any chance it gets. Gave this a shot tonight, though:

90kg x 10

110kg x 10

140kg x 7

160kg x 3

I'd like to see 4-5 of 160kg next session, before stepping up the weight again. I probably had it in me tonight, but it would have been bad form by the end of it and, with my mate pinching a nerve last week during his deadlifts, I'm rather obsessive about maintaining form. Very happy with my progress though; can't be too far off a 200kg 1RM.

How is everyone else going with their deads? Or do we need to rename this the Birds deadlift thread?

nothing wrong with training higher rep ranges periodically... this was the first real week of programming leading up to Nationals so we are doing sets of 10

warmups to 120 then

140 x 10

140 x 10

140 x 10

then from a deficit

140 x 5

150 x 5

160 x 5

180 x 5

didn't there used to be a squat thread?

how tall are you? body shape has advantages towards different lifts somewhat.

also, how long have you been squatting/deadlifting compared to bench? the first weights anyone would be introduced to would be curls or bench at young ages...+ chins/pullups and pushups....

Edited by jangles

how tall are you? body shape has advantages towards different lifts somewhat.

also, how long have you been squatting/deadlifting compared to bench? the first weights anyone would be introduced to would be curls or bench at young ages...+ chins/pullups and pushups....

I have decently long legs for a 6'1 guy but leg length is a poor excuse IMO.

I have only been doing deads and squats since September, so not that long really.

Im just generally not that strong in any lifts hence why I'm doing PPP to try and change that a bit.

I try to avoid using them as an excuse, because all excuses do is stop you from achieving your goals...but long legs do serve a slight disadvantage for some lifts. Consider that deficit deads, which are done at less weight than off the floor, are based on your hips sitting higher than the normal position ala longer legs.

A long torso will also impact on an exercise like stiff legged deadlifts (or deads with high hips), due to added leverage in favour of the weight.

Tall people have more leverage to work against during squats.

However, long arms (also common on tall people) are said to be an advantage for deads and a disadvantage for bench (increased range of motion).

Either way, people have defied these generalisations, because your body, regardless of shape and size, will find ways around all this shit. You might not be genetically set up to win 1st place in a lifting comp, but there's no reason you can't get damn strong and come close, if that's your goal. Only have to look at the <6ft NBA players who punch above their height and can slam dunk, for inspiration.

  • 1 month later...

90kg x 10

110kg x 10

140kg x 7

160kg x 3

I'd like to see 4-5 of 160kg next session, before stepping up the weight again.

As many of you know, I've had a shoulder injury for the last two months, which, playing it safe, has prevented me from doing anything but leg exercise. I'm on the road to recovery as far as pain goes, but I think my shoulder will forever sound like a ratchet spanner.

Having not done deadlifts for 2 months has been very depressing for me and, looking at the empty bar tonight after squats made me say f**k it...let's give deads a go. And so it went:

90kg x 10

110kg x 10

140kg x 4

First two sets were pronated and third set was a mixed, with pronated injured shoulder and supinated non-injured. No pain so far; fingers crossed for the morrow.

Very surprised I was able to lift that given my absence from the exercise and straight after squats (normally did deads on a seperate day). I'd attribute it to maintaining my back with squats in the meantime. Here's hoping I can continue these cause I really missed them and my weekly progress!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...