Jump to content
SAU Community

Recommended Posts

90kg x 10

120kg x 10

150kg x 5

185kg x 1

No difference in numbers tonight, just a repeat of last time for the sake of backing it up and keeping form in check. Felt a bit ordinary/tired today, so wasn't in the mood for stepping up. See how I feel on Tuesday.

Try skipping the 120kg or the 90kg set. See how you go with the one warm up. You might find that will give you some extra intensity on the x5 set.

I do full body sessions as I'm going for overall balance and just general strength and conditioning, I'm not out for big numbers.

If your goal is overall balance then full body sessions aren't actually the best way there. But, the biggest component ( commitment) you are doing well with.

I'm happy with how it's been going and the progress I've had in the time spent.

For my goals it works well for me and mentally suits me better.

In actual deadlift news, I got my repped DL up to my bench which I'm happy about given the road I've had to get here.

Slow progress and low numbers still, but it's still progress, my back has never felt better :)

I think 99% of lifters who dismiss the full body workout have never done it properly for any length of time

My opinion, from training thousands of lifters, the full body workout is the best for anyone not competing in a BB sport (powerlifting,strongman,weightlifting,bodybuilding)

And for those that do plan to compete at a BB sport, there is no better way to get a good base than PROPER full body workouts.

The 3 best lifters I have in the gym are Martin, Max and Jack. They are the only 3 qualified for ProRawFive from PTC (men)

Max did full body workouts for 2 years, Martin about the same and Jack for close to a year

They are all still juniors, all 3 have WR, all 3 podiumed in Open competition at Nats. All 3 will continue to win comps when they are finally men.

Any type of exercise will give results when first starting, lets see what happens in 5 years when the body is exhausted from that type of training

I struggle to train 3 body parts let alone all of them in the same day

If your goal is overall balance then full body sessions aren't actually the best way there. But, the biggest component ( commitment) you are doing well with.

Dan I correct my self on this comment. Should have checked the workouts you are doing in your training log before posting. I was thinking you were doing something else (lots of isolation). Your version of full body is good (compounds).

It's cool Rev.

1) I wasn't really fussed what anyone else thought anyway as I am enjoying the routine and getting some results.

2) I was confident it was a decent full body routine as I'd discussed it with Markos for the exact reason I'd mentioned, balance.

Markos was also nice enough to remind me that I'm miles behind his girls :D

I've been doing full body workouts 3 times a week for the last 4 weeks;

Squats

Flat bench press (or dumbbell press)

Lat pull down (or wide grip chins)

Upright rows

Military press (light as shoulder is still bung)

Dips

Mixing it up with different amounts of sets and reps, although squats, bench and lay pull downs are always 5 sets.

It's hard to put deads in there so on the 4th day have started to do them again with shoulders (mainly rear delts) and arms (tris/bis).

Liking the workout a lot but it is taxing on the body.

As for deads did these last week for the first time in 2 months:

60x10

100x10

120x5

140x5

150x1

160x1

170x1

Was satisfied with that after such a long time off them.

I don't think so, but it still sucks to be so crap at something.

Crap is subjective. What do you actually want from the exercise? The movement to be ratio balanced with the rest of your compound movements? To be stronger than PTC girls? To beat Birds? To impress Markos? To go as strong as your ankle will let you?

Whatever the desire, set a quantifiable strength goal and shoot for it. This might give you motivation to push harder when you can see goalposts. It could be as simple as a target number, or saying that you want to beat your previous session lifts by x KG. If you don't know what you're working towards, your mind will likely take the path of least resistance and subconsciously say "that'll do" for now. Lots of people at commercial gyms make their goal "to look good". This is fine as a mission statement for the long term, but often they do not set weight targets for exercises and end up doing the same mediocre routine/lifts everytime they go = those skinny or fat guys you've seen in the gym who look like they did 5 years ago.

Once you have this goal, implement some 1RM training. You can even stick it at the end of your volume, like I do, if you're OCD about doing your volume sets first (disclaimer: this is NOT the most efficient way to train 1RM, but I believe it does still work). The 1RM doesn't have to be huge to start with. Try 10kg above your current highest weight for your volume sets. Add 5kg to this number each week. You'll be surprised how long you can keep doing this until you plateau. Adjust volume set weights as your 1RM goes up...the two complement each other.

Deadlifts are awesome to 1RM increase because the smallest increments go relatively unnoticed. If you were to add 2.5kg to your 1RM each week, after a year you'd be pulling over 220kg, which is nothing to laugh at. Obviously increases aren't that linear, but nothing says you can't achieve it if you train for it.

As for deads did these last week for the first time in 2 months:

60x10

100x10

120x5

140x5

150x1

160x1

170x1

Was satisfied with that after such a long time off them.

Good work John, keep updating the thread with your deadlift progress. It's amazing how much strength is retained on deads and how quickly you can return to the status quo after a lengthy break. Race me to 200? Hahaha

Maybe you're routine is crap lol

Sorry couldn't help myself lol

lol EAD - I was waiting for it ;)

Crap is subjective. What do you actually want from the exercise? The movement to be ratio balanced with the rest of your compound movements? To be stronger than PTC girls? To beat Birds? To impress Markos? To go as strong as your ankle will let you?

Whatever the desire, set a quantifiable strength goal and shoot for it. This might give you motivation to push harder when you can see goalposts. It could be as simple as a target number, or saying that you want to beat your previous session lifts by x KG. If you don't know what you're working towards, your mind will likely take the path of least resistance and subconsciously say "that'll do" for now. Lots of people at commercial gyms make their goal "to look good". This is fine as a mission statement for the long term, but often they do not set weight targets for exercises and end up doing the same mediocre routine/lifts everytime they go = those skinny or fat guys you've seen in the gym who look like they did 5 years ago.

Once you have this goal, implement some 1RM training. You can even stick it at the end of your volume, like I do, if you're OCD about doing your volume sets first (disclaimer: this is NOT the most efficient way to train 1RM, but I believe it does still work). The 1RM doesn't have to be huge to start with. Try 10kg above your current highest weight for your volume sets. Add 5kg to this number each week. You'll be surprised how long you can keep doing this until you plateau. Adjust volume set weights as your 1RM goes up...the two complement each other.

Deadlifts are awesome to 1RM increase because the smallest increments go relatively unnoticed. If you were to add 2.5kg to your 1RM each week, after a year you'd be pulling over 220kg, which is nothing to laugh at. Obviously increases aren't that linear, but nothing says you can't achieve it if you train for it.

Fair points.

Initially after getting the screw removed and getting the all clear to start doing stuff again, the goal was start squatting and DL because I was doing neither. Then I had that training session with Matt and at that point my goal was get squat and DL above bench, and I'm just about there.

From there, I'm not sure. It really depends on how my ankle tolerates it as my next goal after getting squat and DL above my bench is to get back into running as I'm only walking at the moment. That will take some time for the ankle to handle running and 3x gym a week. I realise running is counter productive to strength training, but it's good for the dog and good for me and allows me to eat more :D

After that I'm not sure, maybe aim for 140 squat and 160 DL as they seemed like decent totals for me if my ankle can deal with it. That would be a long term goal though as I need to take it slowly - I will also need more weights.

Any type of exercise will give results when first starting, lets see what happens in 5 years when the body is exhausted from that type of training

I struggle to train 3 body parts let alone all of them in the same day

Gday Pat, here is something for you, an accidental 5 year study.

My son Max started on my beginners program at 15, 5 years ago. It consisted of squats, bench, deads, cleans, overheads, rows and chins.

He was 51kg.

He has just turned 21, trains 7 days a week, weighs 90kg, squats, in competition, not gym lifts, 270kg, benches 170kg paused and deadlifts 260kg. He is 21 and has numerous World Records and Medals from World Championships. Until 2010 he trained whole body, started 2007.

The base he laid training correctly from the beginning will hold him in good stead for the rest of his career. He has never ignored lifts that will be beneficial, here are a few "odd" vids

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...