Jump to content
SAU Community

Recommended Posts

Ok guys, time for our first Track Day for 2013!

Since our previous two Track Days have been such a hit with the inclusion of passengers, we've decided to run the same format. As before, there's no cage needed, just a helmet each, long sleeves and pants with enclosed shoes, a Special Day License (if you purchased one at the last event, bring it along; it may still be valid), a waiver form and an extra bit of money to cover insurances and you can be blasting around Mallala with your mate in the passenger seat!
What could be better than that!?!?!?
As always, this will be a Grip only event so please no sliding; we have a great name as a club at Mallala and don't want to jeapordise it.
There are 22 spots up for grabs and will remain exclusive to SAU-SA members for the first two weeks. If your Membership has Lapsed you will also need to renew, which is $30 to do so.
After that, if spots aren't filled we will open up to general forum members. General users will have to Sign Up to SAU:SA and become Club Members at the Normal cost of $30 Membership and $15 Admin Fee.
You've got just over two months to prepare so no excuses that your cars aren't ready, book the time off and get into it! Tell your mates, bring your parents!
The total cost for the Day will be $250 (up from the usual $200 to cover the extra insurance needed for a Day like this) PLUS an extra $50 for a special AASA license to allow passengers. Once again, if you purchased one at the last event, bring it along; it may still be valid. If you have a CAMS license, you won't need to pay the extra $50.
Applications are available on the Day, so there's no worries there, just make sure you have the green stuff in hand.
Deposits will be needed as we need to secure the Track, this will be $150 and will need to be payable by April 15th (non refundable), as usual any problems with money, get in touch with us, we aren't monsters and understand things come up so we can work around it.
The remainder is due on the 1st May so you've got plenty of time to get the cash together.
Also to note lap timers can be hired from SAU:SA for the Day and at a very low cost of $50 per person. These are a great tool to help you learn what works and what doesn't on Track and just how things influence your times. They're also good for bragging to friends Please note if you want to hire one and we will mark you down on the list.
They've been quite popular in the past as those who have used them can attest to; payment for these is also due on the 15th April.
As usual, we like to reward our members and give something back so a free BBQ will also be available on the Day however drinks will be $1 per can.
** If you are intending to bring friends and or family, can you please make note of how many you intend to bring as a rough indication of just how much food for us to bring. **
SAUSA Payment details
Name: Skylines Australia - SA Chapter
BSB: 105 192
ACC: 028 822 340
Date: 15th May 2013
Attending
-------------
1) Ryan - ISC Performance - Paid in full
2) Shane Murphy (DriftingSA) - Paid in full
3) Steven - RBJETT - Paid in full
4) Brad - Tommy Kaira RL - Paid in full
5) DC_GTST - Paid in full (+ Timer)
6) DC_GTST +1 - Deposit Received (+ Timer)
7) John Munro - Paid in full
8) Japcoop - Paid in full
9) Krishy - Paid in full
10) illmatic - Paid in full (+ Timer)
11) Aberax - Paid in full
12) skylineking - Paid in full (+ Timer)
13) Snake-Eyes-Racing-1 - Paid in full (+ Timer)
14) Fliggy - Paid in full
15) Phil (33 GTR)
16) Phil's mate (33 GTSt)
17) Phils other mate (32 GTR)
18)
19)
20)
21)
22)
Reserves
1) Nick - R33 Sleeper
2) TheProDaniel
3)
4)
Link to comment
https://www.sau.com.au/forums/topic/421431-sausa-track-day-7-with-passengers/
Share on other sites

Just to clarify, is the $250 for people who want to drive? Does the passenger need to pay anything?

No, the driver is to pay the $250 as that is the cost to take the car out on track. There is also the day license at $50 which you pay on the day to Mallala themselves, unless you have a CAMS license or a valid AASA license.

If your membership to SAU:SA has lapsed, that will also be due before the day.

Both you and your passenger need to wear long sleeves and pants, enclosed shoes, and an ADR Helmet.

I asked the boss today (myself) If I could have the 15th off and I said yes. So I will be in for this one. It will be my first grip day out.

Will be good to see it out there Brad!

I will be there, havent decided yet if im going to take my car out on the track for a few laps or not

Put me down as a maybe for this stage. I've got a modern regularity the weekend before (11th May) that I'm aiming for so if money and work permits (I'm fairly sure I'll be away that week for work but I'll know in the next week or so for sure) I'll be there :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...