Jump to content
SAU Community

Recommended Posts

Hey guys,

I'm about to buy a car but the seller is having difficulty getting a rwc due to the modifications. He's offering a significant discount if I take it without a rwc.

I don't fully understand the rwc process. One of the main issues on this car is that it has upgraded brakes and no engineers cert for this mod. If I were to get a rwc from a shop, what would they do? Replace the standard brakes, sign a form, then put the upgraded ones back on?

What's to stop them from simply saying the brakes were standard when they signed the form? Is there a way Vicroads can police it or check it out?

Can anyone provide some insight into the process?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/422453-getting-a-rwc-on-a-modified-car/
Share on other sites

im not convinced they would check that they have been upgraded and nor would they care

they do a stopping test to ensure the car pulls up correctly at speeds and other than that, i cant see why it would fail the brake test or brakes

its a different story when you goto vicroads with the roadworthy cert for a new rego and they do the inpsection

they might go hey why does this have ap racing 6 pots on the front when it should have 4 or they might not even notice (or care)

The shop we took it to which has a reputation for giving easy RWC knocked it back on the fact it had big front brakes without the engineers cert.

Reckon I fix everything else and take it elsewhere?

The shop we took it to which has a reputation for giving easy RWC knocked it back on the fact it had big front brakes without the engineers cert.

LOL it obviously wasn't that easy!! To get RWCs now (unlike in the good old days) photos of everything must be taken - including the brakes. Aftermarket brakes look quite different to factory brakes so maybe that's what the workshop pulled you up on - they were afraid of getting busted for okaying something obvious like that

  • 3 weeks later...

Didn't realise that photos were needed for everything now. Maybe that's why the price of RWCs have gone up so much since a few years ago.

Best to go through the sheet that tells you what needs to be done, repair/replace/return those parts to stock, get a RWC, then put the go/stop fast bits back on.

As far as getting photos of everything they pass that is incorrect. In fact a dodgy RWC is not much harder to write out now then before. If i were writing out a dodgy rwc (which i don't) i would avoid taking photos of the modifications. Then as before you still have the argument that it was modified after it left the rwc check. RWC testers are only encouraged to take photos of things you believe may be modified after the car leaves.

If in Kierans case i was doing a rwc i would probably put standard wheels on it. Take one photo of the car on the hoist, one photo of the standard wheel (on the rear where he has standard brakes), one of the odometer, one of the vin stamped into the body and one of the rego label. Showing no proof of the Mods. As the car is registered already (i think) you would not have to visit vic roads for an inspection anyway.

The new photo system has got everyone scared but in practice its no worse than before.

In saying that you still need to find someone who is willing to risk their and their business licence.

If in Kierans case i was doing a rwc i would probably put standard wheels on it.

I wish it were that easy. Anyone have rims that are 17" or smaller, will clear the 6 pot front brakes and won't stick out of the guards?

As for the rest of it, I just sourced most of the stock parts I need and we're putting it back to standard. Intercooler and brakes are the biggest issue, but I have all the parts so its just the labour to swap it over then swap it back.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...