Jump to content
SAU Community

Recommended Posts

Stoptechs are on the front now.. So much better than brembos , most likey the 5.1 fluid that made the difference

Oil catch can in

Fuel filter done

Gave the new rubber a blast and it has change the car, no more unpredictable oversteer, and more neutral.

Reliability testing continues

Did about 120 laps at Wakefield

Not very fast a best of 11.8

Even at 9psi the f*ker is laggy as shit and then doesn't power on. Even on gear shifts there is a noticeable half second before boost kicks back in anyway I think the -7 are f**ked and need to be replaced before they die in a fire( or I have a boost leak)

The rsr rubber is pretty shit as well.. Ill reserve judgment after a wheel alignment

Your a very hard critic fatz. Lots of us would die to just be able to drive a stock GTR round a track lol. Hope you get it sorted :) 120 laps is a nice effort :) and no brakeages :P

put in some adjustable camber arms front and rear

gave the car a once over and discovered a oil leak from one of the high pressure hoses on the 4wd( cracked it up but looks like it need replacing)

will have a look at the ic hoses to see if i can find a boost leak tonight

310911_248532748619734_1996155653_n.jpg

put a proper bucket seat in this thing over the weekend ( as teh stock gtr seat is shit)

flashy fire extinguisher brack hit everywhere on the bride SL rails( not so flashy anymore lol)

so its been modified to fit

will be getting the rear guards rolled and hopefull a alignment soon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...