Jump to content
SAU Community

Worth The Price Hike?

K4L4M1TY
 Share

Recommended Posts

K4L4M1TY Contributor

K4L4M1TY

Posted
Posted

Looking at some new front discs for a non-Brembo R32 GT-R as the oldies are starting to squeal constantly and RDA seem to be the cheapest decent discs around for a decent price. What i'd like to know is if there is going to be a big enough difference in performance between their plain discs and their basic slotted drilled discs to justify spending around twice the price? It's only due to still having the original nissan calipers that we're looking for a cheap 'band-aid' solution to last a couple of months.

Link to comment
https://www.sau.com.au/forums/topic/425219-worth-the-price-hike/
Share on other sites
K4L4M1TY Contributor

K4L4M1TY

Posted
  • Author
Posted (edited)

seems you need to decide if you want cheap band-aid fix or something decent...

have been told the RDA dimple ones are a good way to go.

Yeah, not got the funds for better discs, but bigger brakes are already high on the list of needs so it's only going to be temporary hopefully. I suppose everyone here goes GSLRallysport for their RDA+QFM setups? Any one maybe in Sydney or Newcastle or in between?

Edited by K4L4M1TY
djr81 Grand Master

djr81

Posted
Posted

Looking at some new front discs for a non-Brembo R32 GT-R as the oldies are starting to squeal constantly and RDA seem to be the cheapest decent discs around for a decent price. What i'd like to know is if there is going to be a big enough difference in performance between their plain discs and their basic slotted drilled discs to justify spending around twice the price? It's only due to still having the original nissan calipers that we're looking for a cheap 'band-aid' solution to last a couple of months.

Plain discs (Not slotted, drilled or dimpled) work fine on road cars. So just get some of them and save your money.

K4L4M1TY Contributor

K4L4M1TY

Posted
  • Author
Posted

Just rang GSL Rallysport and Brakes direct, both same prices and said plain discs are actually more than the slotted ones. Shipping will be a bit more from GSL probably but i'd rather go with an SAU advertised dealer than anyone else and especially over the guy on Ebay with some hilarious feedback. I think i'll ring GSL back and see what they can do for postage on them, cheers for the advice so far.

Imago Rookie

Imago

Posted
Posted

Slotted rotors work, I reckon the pad bite is unreal.

However no, I don't appreciate the price difference.

I buy standard rotors for 70-90 bucks a pair and send them to a CNC machinist friend who slots all my new rotors for a quick cash job. I generally end up at least 50 bucks and sometimes well over 100 bucks ahead of buying them from RDA/DBA etc

All that needs to happen is to set out an inner radius of pad area, an outer, and to make some arcs any slight radius rouhgly 6 times over the rotor. Then flip over... An easy task for any CNC machinist who knows what they're doing with a bullnose bit.

Alternatively, I reckon the Sumitomo calipers are more than enough for a Skyline... Just a decent set of pads and standard rotors should do.

K4L4M1TY Contributor

K4L4M1TY

Posted
  • Author
Posted

if you honestly want a cheap band-aid fix for only a few months, try ebay rotors.... mine havent fallen apart yet :ph34r:

Was going to until I read some guy actually got a used machined disc in his set which put me off instantly, like how bad do you have to be. Rang GSL Rallysport back and ordered the RDA front discs and a set of the QFM HPX pads. Told him I found him through SAU too which he seem pleased to hear. :3some:

Greg at GSL said RDA had updated their range and they were some dark anodised style dimpled discs so i'm keen to see how they look aswell. All I can say is thanks for the help guys and a big thanks to Greg at GSL for being very helpful over the phone and organising it all promptly, cheers mate. :action-smiley-069:

mystery_kid Mentor

mystery_kid

Posted
Posted

Why have you got big brake upgrade high on your list?

Do you take your car on the track a lot?

The stock brakes are highly effective for quite a while if you upgrade the pads and rotors before you need to go spendkng thousands on bigger brakes

K4L4M1TY Contributor

K4L4M1TY

Posted
  • Author
Posted

Why have you got big brake upgrade high on your list?

Do you take your car on the track a lot?

The stock brakes are highly effective for quite a while if you upgrade the pads and rotors before you need to go spendkng thousands on bigger brakes

With a few simple mods the car can be pushed easily to 350kw, with internals its 400, but yes the car will see plenty of track time once it is reliable enough not to break parts. The pads arrived on Friday, discs today. I really hope they get rid of the soft, spongey, very un-nerving feeling the car has had since purchase..

Sinista32 Grand Master

Sinista32

Posted
Posted (edited)

Look at adjusting the brake peddle up.

Similar problem on my 32GTR (ABS).

I have replaced everything with new to get rid of this - Discs, pads, callipers, braided lines, BMC upgrade, Booster. Bled 5 times with new Motul 600bf (by 3 different JDM Import shops).

About to replace new Ultimate pads with new Project MU HC+ pads (not cheap) any of this.

Note: ABS DOES NEED BLEEDING.

I'm fairly certain now that I need to adjust peddle to where I feel comfortable/confident.

I should have done this first :/ (plus it should have been suggested by said "experts").

Edited by Sinista32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...