Jump to content
SAU Community

Recommended Posts

Yep, V1's, I didn't get a choice in spring rates at the time, so I can't remember the rates, I got the first ever set shipped I think. Just go with the standard setup and they should be very comfortable.

The arm is 28781AQ010 and I got it direct from Nissan for $55 and the blade assembly is AY003H25AR unsure how much from Nissan. You will also need a refill I assume.

Copied and pasted from other thread.

http://nissan.epcdata.ru/stagea/pnm35/6845-vq35de/body/287/?frame_no=PNM35700538

  • 4 weeks later...

http://www.ebay.com.au/itm/181138430477?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

This is the cheapest pollen filter I could find to fit a M35 at about $11 delivered. I fitted the same one a few weeks ago & the quality seemed at least as good as the Ryco one I used before. The postage from the UK only took a week too.

Radiator hoses

Nissan Part No.

21501AL5000 upper hose
21503CD000 lower hose

Gates Part No.
22967 upper hose
22968 lower hose

Oh and Burson Part number for Koyo V35 radiator

NIS081pacak I think.

I was at work looking for the part numbers in the Ecatalog and couldn't find a listing for the 350z's so after I trolled through EPCDATA and then google searched the nissan part numbers those came up in ebay. Can be had quite cheap.

Edited by M35woah

My edit button has gone :(.

But more research on the hoses as Gates had none in stock and would take 12 weeks to get it, faqdat.

So I found out Mackay has got em!

Upper: CH4966
Lower: CH4962
or CH4960

The two lower hoses I believe will fit but CH4960 has a slight extra bend.

Uh oh. Thinking about buying another M35.

Was seriously thinking about a R36 Passat but after closer inspection they are bigger and heavier than both NM35 (200kg heavier) and PNM35 (~80kg heavier).. assuming my specification sources are accurate.

So tell me about these PNM35's lads - what is stock power like compared to a stock NM35? How is fuel economy? I know a lot of you don't care but lets be honest, petrol prices are only going in one direction.

Any things that are highly desirable on them like the NM35? Trans cooler, shift kit, upgraded radiator? Any other common problems?

If you want boostz and powerz go NM35 which I think you know :P

If you want to keep yo keys in your pocket when start and unlock the car and have nicer interior then PNM35 is for win.

Petrol is probably similar, as for shift kit and trans cooler they can be optional, radiator not needed if staying stock, don't have to budget for new tubz or AFM.

Stock power is fine for day to day, but coming from a modded NM35 you'll probably want more.

Get a trans cooler and Scott's coolant mod. You can stick with the OEM radiator without concern unless you are going to boost it of course.

Also, should note that the PNM35's don't have that seemingly problematic pump for the ATTESSA.

Shift kit I hear is good although they do shift noticeably better than the NM in stock form.

Petrol is very slightly better although they are flash tuned if you feel the need (or want).

No real "common problems". Pretty solid car all round and having owned both, can certainly say that the PM is much nicer than the NM.

"If you want to keep yo keys in your pocket when start and unlock the car and have nicer interior then PNM35 is for win."

I cannot stress enough how awesome it is to not have to take the keys out of your pocket... at all.

External lock/unlock buttons on the front doors and hatch. Keyless ignition (although you can still put the key in if you need to).

Also, PM35's look better :P

Yep, I followed yours with interest but I guess if I was going to go with a PNM35 it would be because it's NA. Adding a turbo would ruin the simplicity that I like about them.

What is a reasonably sort of power figure to get out of one without ridiculous mods? Say intake and exhaust with a remap?

Or do they need cams, etc?

Almost nothing. It's just not worth modding one besides some really basic stuff. It's too expensive for the gains compared to a turbo car. Anything from a 350z motors will fit them, so you can go nuts, but realistically, most people are happy to have a bit more noise and breathing. I don't want to give a power figure, cause whatever dyno you go on will be different.

If I was to "finish" mine, it would have high flow cats and a uprev tune. No cams or headers. Mine currently runs 94mph, I think it was, down the 1/4. Compare that to the nm35 numbers in relation to power.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...