Jump to content
SAU Community

Recommended Posts

Yep, V1's, I didn't get a choice in spring rates at the time, so I can't remember the rates, I got the first ever set shipped I think. Just go with the standard setup and they should be very comfortable.

The arm is 28781AQ010 and I got it direct from Nissan for $55 and the blade assembly is AY003H25AR unsure how much from Nissan. You will also need a refill I assume.

Copied and pasted from other thread.

http://nissan.epcdata.ru/stagea/pnm35/6845-vq35de/body/287/?frame_no=PNM35700538

  • 4 weeks later...

http://www.ebay.com.au/itm/181138430477?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

This is the cheapest pollen filter I could find to fit a M35 at about $11 delivered. I fitted the same one a few weeks ago & the quality seemed at least as good as the Ryco one I used before. The postage from the UK only took a week too.

Radiator hoses

Nissan Part No.

21501AL5000 upper hose
21503CD000 lower hose

Gates Part No.
22967 upper hose
22968 lower hose

Oh and Burson Part number for Koyo V35 radiator

NIS081pacak I think.

I was at work looking for the part numbers in the Ecatalog and couldn't find a listing for the 350z's so after I trolled through EPCDATA and then google searched the nissan part numbers those came up in ebay. Can be had quite cheap.

Edited by M35woah

My edit button has gone :(.

But more research on the hoses as Gates had none in stock and would take 12 weeks to get it, faqdat.

So I found out Mackay has got em!

Upper: CH4966
Lower: CH4962
or CH4960

The two lower hoses I believe will fit but CH4960 has a slight extra bend.

Uh oh. Thinking about buying another M35.

Was seriously thinking about a R36 Passat but after closer inspection they are bigger and heavier than both NM35 (200kg heavier) and PNM35 (~80kg heavier).. assuming my specification sources are accurate.

So tell me about these PNM35's lads - what is stock power like compared to a stock NM35? How is fuel economy? I know a lot of you don't care but lets be honest, petrol prices are only going in one direction.

Any things that are highly desirable on them like the NM35? Trans cooler, shift kit, upgraded radiator? Any other common problems?

If you want boostz and powerz go NM35 which I think you know :P

If you want to keep yo keys in your pocket when start and unlock the car and have nicer interior then PNM35 is for win.

Petrol is probably similar, as for shift kit and trans cooler they can be optional, radiator not needed if staying stock, don't have to budget for new tubz or AFM.

Stock power is fine for day to day, but coming from a modded NM35 you'll probably want more.

Get a trans cooler and Scott's coolant mod. You can stick with the OEM radiator without concern unless you are going to boost it of course.

Also, should note that the PNM35's don't have that seemingly problematic pump for the ATTESSA.

Shift kit I hear is good although they do shift noticeably better than the NM in stock form.

Petrol is very slightly better although they are flash tuned if you feel the need (or want).

No real "common problems". Pretty solid car all round and having owned both, can certainly say that the PM is much nicer than the NM.

"If you want to keep yo keys in your pocket when start and unlock the car and have nicer interior then PNM35 is for win."

I cannot stress enough how awesome it is to not have to take the keys out of your pocket... at all.

External lock/unlock buttons on the front doors and hatch. Keyless ignition (although you can still put the key in if you need to).

Also, PM35's look better :P

Yep, I followed yours with interest but I guess if I was going to go with a PNM35 it would be because it's NA. Adding a turbo would ruin the simplicity that I like about them.

What is a reasonably sort of power figure to get out of one without ridiculous mods? Say intake and exhaust with a remap?

Or do they need cams, etc?

Almost nothing. It's just not worth modding one besides some really basic stuff. It's too expensive for the gains compared to a turbo car. Anything from a 350z motors will fit them, so you can go nuts, but realistically, most people are happy to have a bit more noise and breathing. I don't want to give a power figure, cause whatever dyno you go on will be different.

If I was to "finish" mine, it would have high flow cats and a uprev tune. No cams or headers. Mine currently runs 94mph, I think it was, down the 1/4. Compare that to the nm35 numbers in relation to power.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...