Jump to content
SAU Community

Recommended Posts

From pcv to manifold, it isn't a complicated circuit. The PCV is under the bov pipe on the drivers side valve cover.

The hardest part is finding somewhere to put the can.

  • Like 1

Does anyone know what causes an ABS "C1111 Pump Motor Circuit Fault" in an M35?

I've got the ABS warning light coming on about 75% of starts.

Is it a well known issue, or am I off to the auto electricians for a fishing expedition?

  • 3 months later...

I have fault codes 0100 (afm malfunction) & 0110 (intake temp sensor issue) will changing the afm fix these issues

I would say almost certainly. Both bits are the same device.

  • 2 weeks later...

Hi...... Doing a little bit of work to my car over the next few weeks, but one question in particular...

Will a nismo ECU and emange be a stable enough platform with 610cc injectors and slightly larger turbo (Hypergear SS2 profile)..

Alright. Thanks Scotty. That's what i thought as well. The workshop seems to think its a risky choice with injectors that size and is pushing me towards a haltech or similar that is outside my budget.

Whatever they came with was perfect for the road. If it was a track car I would have stiffened them up a bit, but they ran ok at PI and Sandown with the dampening set hard.

I bought the first set of V1's, the BR's weren't available afaik when I bought them.

  • 1 month later...

What struts would be the same as a m35? Wanting to put bags on one but it's near impossible to find anything.

It has been done by a fella called Adam Lehmann, in SA. Not sure of his forum name off the top of my head.

What struts would be the same as a m35? Wanting to put bags on one but it's near impossible to find anything.

It has been done by a fella called Adam Lehmann, in SA. Not sure of his forum name off the top of my head.

The G35x in the states have the same front end but I'm not sure if they do bags for the AWD models.

Adam has a RWD M35 so he could have gotten suspension from the states. I have found this mob:

http://bagriders.com/modlab/categories/AIR-RIDE-KITS/INFINITI/G35/

Bottom of the page are the universal kits, looks like they replace the springs and you keep your existing shocks.

  • 5 weeks later...

Part numbers for turbo gaskets and cost.

14415-4P200 - turbo to manifold gasket (1) $41.61 each

144654P200 - turbo intercooler piping outlet gasket (1) $5.22

1519673L00 - oil return line gasket (1) $2.97 each

1518901P00 - eye bolt gasket (4) $3.48 each

1102601M02 - turbo drain washer (4) $1.91 each

These were purchased from Cleveland Nissan.

  • Like 1
  • 1 month later...

If anyone has had troubles getting drivers side cam cover gasket ( aq800 ) the vq30 is a match, my supplier took a few goes to figure this out as he couldn't find the original.

Also does anyone know if the 350z pulley kits work on vq25det ? Or will they be under/over driven? I'm sure they take the same belt but...

Edited by zelda

Why would you have issues getting the rocker gasket? I have three here, and Nissan get them in regularly for me?

Don't bother with the pulley kits, keep everything OEM unless you want crank harmonics to destroy your main bearings.

Didn't go through Nissan Scott, since i get a great deal at partmaster here in NZ they can source them waaay cheaper than nissan will ever do for me lol.

That's good to know about the pulley kits thanks, I'll use the money on other goodies. Pm sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought Australia got rid of the "drag dodgy fuel up to 91 RON with ethanol", which is why all E10 advertise as "up to 94 RON" ? Anyway I put E10/91 in the missus' Mazda because she empties the tank weekly, when all my cars get 98RON. tl;dr - turbo - 98 RON, if you can't afford that, sell it and get a commuter car (or tune your car for 91, which no one does).
    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
×
×
  • Create New...