Jump to content
SAU Community

Recommended Posts

Had the oznats over the weekend...

The car wasnt finished but just bolted it together... need to finish the interior and the front end , side skirts etc etc

Have to sort out my traction issues. Even with slicks i cant keep the power down. If you listen to the video im constantly on and off throttle and constantly loosing traction. even on the well prepped drag strip. any ideas would be great

video-1477097823.mp4

  • 7 months later...
On 25/08/2015 at 11:21 AM, Adz2332 said:

Long time coming but i got the car tuned, again. This time by a different tuner and to say it was tuned badly seems an understatement.

Havent had a chance to take it out to the drags again but have a drift prac day coming up in 3 weeks i think, so will test it out then

attached the new dyno print out

post-33454-0-75076200-1440467476_thumb.jpg

post-33454-0-43456200-1440467490_thumb.jpg

 

Who did the good tune ?

On 28/04/2014 at 0:51 PM, Adz2332 said:

stripping down the engine at the moment. removing things i dont need and getting it ready for.....

20140425_132205_zps5265e3d5.jpg

This.....

20140425_095731_zps5d9d2432.jpg

HTA3076R

also have a trial waste gate, dump, 6boost mani and screamer

10307394_10154088892755215_2184393771918

 

I wanted an FP HTA turbo before i got mucked around and sent a wrong turbo.  Nice to see it made plenty of power

  • 4 weeks later...

Put on some AR1s  285s all round and went and did a track day at mallala on sat.

was a blast. car went really well and the tyres were excellent for the price

i now need to upgrade the brakes as it boiled its guts out and lost all braking by the end. and also get some coilovers to

But was a great day! 

19399721_10158955302765215_7190593453162086498_n.jpg

19400561_10155157369429550_3670939122459634837_o.jpg

  • 3 weeks later...

forgot to add.

had the VCT sorted working and tuned before the track day. You could see a bit of a difference on the dyno print out. but the butt dyno it made a hell of a difference. felt boost came on so much earlier and smoother. made the car so much easier to drive and so much quicker all round.

Funny how much it changed the whole feeling of the car

  • Like 1
  • 1 month later...

currently getting parts together for a rb25/30 build.

so far have a 30 block

my rb25 head, 6boost main, plazaman plenum, 1000cc injectors, computer etc etc

have to work out, pistons, bearings, rods etc

want to go big to hold 450kws ish...

 

any links or builds i should look at?

8 minutes ago, Adz2332 said:

any links or builds i should look at?

No, but we did one earlier this year so I've got a fairly good handle on what's needed. We used a stock bottom end (found an RB30 bottom end that had never been run). 

It's the little things that you'll need to sort out:

- the oil feed for the VCT (the machine shop we use has done quite a few 25/30's & knows what's needed),

-what you do with the cold start crap and associated hoses (we removed pretty much all of it, and don't regret it),

-coolant lines on the intake side (once again we got rid of some),

-the oil drain / breather on the front exhaust side (RB30 block doesn't have the port for this),

-engine mounts / raising the bonnet (we kept the mounts stock, and raised the rear of the bonnet with some spacers under the hinges - also had to ditch the strut tower brace. Didn't want to lower the mounts as we have an extended sump, and didn't want it to be the lowest part of the car),

-the dump pipe (had to cut & extend ours, as turbo was now 40mm higher),

-you'll probably need a new RB30 water pump (the RB25 one has a slotted hole, which doesn't quite cover the water channel in the block - ask me how I know),

-the intake piping (once again because the top of our engine was higher, we needed longer intake pipe silicone joiners on the intake pipes, just above the exhaust manifold. Had to buy a 1 metre length as we couldn't find the right size in smaller lengths),

-you will need to buy a second timing belt tensioner & a longer timing belt

-intake side wiring - we had to make up some extended loom mounts because the head was now higher.

 

I can't think of anything else at the moment. If you want the machine shop's contact details let me know - he's in Pooraka. We are loving the engine - the torque delivery is beautiful.

looking at some budget coils.

Monopro Type Coilovers- Street/Track

http://www.option1garage.com.au/HSD.htm

or

http://www.option1garage.com.au/BCRacing.htm

BR Series Street and Circuit Coilover

 

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...