Jump to content
SAU Community

Recommended Posts

  • 1 month later...
  • 2 months later...

No real updates, have been working on this one.

IMGP2673_resize_zpsf93e8463.jpg

And melted a hole in number 6 piston in the purple hatch, lift pump failed and leaned out at Heathcote last October. The motor is currently at JPC getting rebuilt.

20141002_162253_resize_zpsada0a4fd.jpg

  • Like 1
  • 2 months later...

Looking at the cover of the street machine and wondering if that's a different torana.

I thought the same at first, but that cover car is running fats and skinnies so no awd drivetrain i don't think, tough car though.

Then this one is obviously more deserving of being a cover car, for the difficulty of installing the full drive train, but it may not end with the bling factor that street machine publishes,

Edited by DR 32R

Click on the image and go to his photo bucket. Lots of progress shown there. Impressive welding his own retro wheel centres to the rim to match the hub offset.

Craftsman.

  • 2 weeks later...

Got a shock when I saw an LX on the cover of Street Machine with the title 'GODZILLA' - I totally thought it was this build until I flicked through. Looks great but made me more excited about this one. :)

  • 4 months later...

Following this awesome build. You are very talented, The brother in-law and I put a 2jz gte into a lx sedan and that thing was mental with 290kw at the wheels but didnt stop or turn corners very well cant wait to see the finished product

  • 3 weeks later...
  • 1 month later...

Update time. So finished building the LX sedan, rebuilt motor back in the purple hatch just waiting to get it tuned, brought a HT kingswood I'm still trying

to work out why I brought it, and gave my HJ panel van some love.

torana_zpssyiu1eib.jpg

IMGP2785_resize_zpsmizijtow.jpg

IMGP2788_resize_zpsmavpmzui.jpg

The HT

IMGP2820_resize_zpsfkvqpmg6.jpg

The van, air baged, 9", 4 link, tubbed, injected 308, t700 box.

Car2_resize.jpg

Image01d_resize.jpg

IMGP1024_resize.jpg

So now I'm back into this project, brought some recaro SR2 and started setting up the panels to set the panel gaps and fit the flairs which will need a bit of work.

IMGP2962_resize_zpsqkxphf67.jpg

IMGP2964_resize_zpsm7dreaei.jpg

  • Like 2

Ended up getting some Achilles 265/35 18 sport 2's to set up the flairs, the front flairs are going to need a lot of work.

I think I will need to cut them and extend the height to allow for when the wheels are turned and suspension travel.

IMGP2966_resize_zpsdnzk9bze.jpg

IMGP2967_resize_zpstealohmb.jpg

And why, because voices. :rofl2:

IMGP2971_resize_zpsvdrivo85.jpg

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...