Jump to content
SAU Community

Recommended Posts

It's more to do with the fact that the shocker mount were never designed to take the weight of the vehicle.

Now that the coil overs are mounted to this spot I have just added extra bracing to transfer the load back to the original spring pocket/body rails.

Got some suspension and other bolts zinc plated and picked up some inner and outer door handles. 

 

Sent Bonneville Consulting and email tuesday but haven't heard anything back yet.

 

IMGP3389_resize_zpsm44efmai.jpg

Started fitting the back seat, needed to modify the seat base to fit over the skyline tunnel.

I used the seat base out of a UC hatch that I brought for spare parts but it may turn into a future project and wont need a 

back seat. ( S14 front suspension, R32 rear suspension, drift ute, maybe)

The wire frame was a bit bent so it had to be straightened and reshaped over the tunnel.

IMGP3394_resize_zpsco1onvrk.jpg

IMGP3395_resize_zpssjpbgsed.jpg

Rigged up a hot wire to cut the foam.

IMGP3392_resize_zpsr43fk3zv.jpg

All fitted up, I will probably only register the hatch as a 4 seater as there isn't mush foam left in the middle seat.

IMGP3391_resize_zpsszolawfp.jpg

 

 

  • Like 1
  • 4 weeks later...

Gave the drive shafts a clean up and some paint.

 

IMGP3397_resize_zps8ussojir.jpg

 

Removed some of the lip on the fire wall and fully seam welded it.

 

IMGP3396_resize_zpss2wyooym.jpg

 

Added some more strengthening to the front suspension towers to make sure the load is transferred back to the rail where the original subframe mounted. 

 

IMGP3398_resize_zps0za23c1h.jpg

 

  • Like 2
  • 4 weeks later...

Have contacted a few engineers to see if they were interested in taking on the project. I've chosen one, now I have to reassemble the car

so he can see where it's at and where to move forward from here. Hopefully he will look at it in a few weeks.

 IMGP3419_resize_zps4xz2je4m.jpg

 

IMGP3426_resize_zpsv8wubuia.jpg

 

IMGP3434_resize_zpsre3c0d5d.jpg

  • Like 6
  • 3 weeks later...

Had the engineer, Peter Turner http://www.techedaustralia.com.au/ have a look at the project.

He is happy with what has been done, he wants an extra brace between the rear suspension towers and I

have to have retractable seat belts for the outer back seats. The car will have to pass the IM240 emission test

and also have a torsional rigidity test. The plan now is to get the car ready for the torsional test then 

start the panel work.

Rear seat belts something like this.

IMGP3441_resize_zpsfopdubqe.jpg

 

  • Like 3
  • 2 weeks later...
  • 2 weeks later...

Decided to mount the seat belt reel besides the back seat so they don't stand out as much.

IMGP3454_resize_zps3ltzd5zb.jpg

Ground up a piece of flat bar to match the shape of the panel.

IMGP3451_resize_zpsz9lp2wxa.jpg

Will also weld this comp plate over the outside when the engineer gives me the ok.

IMGP3455_resize_zpsbgrgutk8.jpg

Also made up some panels for the back out of some aluminium that i'll cover with some vinyl.

IMGP3449_resize_zpstvagz2hw.jpg

 

  • Like 3
  • 3 weeks later...
  • 1 month later...
  • 2 weeks later...

Started fixing the rust in the tail light bucket.

ZDyXcFG.jpg

First had to get dogs ok on the tail light bucket from the spare parts car.

esyfN8J.jpg

HAZDvLz.jpg

Only going to replace the bottom half but had to do a small repair first.

ts16BTr.jpg

6B982Sk.jpg

Had to repair some rust in the corner. 

ATV1bbQ.jpg

ZHZryEO.jpg

Bottom replaced.

11LD6hU.jpg

  • Like 6

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
×
×
  • Create New...