Jump to content
SAU Community

Recommended Posts

  • 1 month later...
  • 2 months later...

Bit of an update, got the front flares to a point I am happy with.

A9X_0251_resize.thumb.JPG.e03aee5d060d2360abf67c23ec043c59.JPG

Started on the rear flares, cut the bottoms back off and started again.

A9X_0253_resize.thumb.JPG.9a59e8981bd89cf148db2663b817e8e7.JPG

A9X_0259_resize.thumb.JPG.5e000fac85c821cd8bfde92f999cd430.JPG

Wasn't happy with the bonnet hinges I made so decided to use VE commodore boot hinges, had to create a pocket each side for the hinges to sit in.

A9X_0267_resize.thumb.JPG.4b3abf7790dbe6e28f726cf889394985.JPG

A9X_0281_resize.thumb.JPG.746743453dfd45496b9374e11efcd6f2.JPG

A9X_0283_resize.thumb.JPG.cff386d58a40a871493c274c657770ea.JPG

A9X_0286_resize.thumb.JPG.edc5441996221a93aa6db36fcd17f78a.JPG

Also welded up some holes and seams in the engine bay.

A9X_0306_resize.thumb.JPG.b455434bcb4af76f560b0253b60eaf2f.JPG

  • Like 7
  • 4 months later...

The motor has been dropped off at JPC and the seats are at the trimmers.

Cut off the sill to repair the damage.

A9X_0325_resize.thumb.JPG.ca3d87542fceea8346a68e13dcf4fe31.JPG

A9X_0326_resize.thumb.JPG.fdcd881b7d495a75dfc15ae80758a638.JPGA9X_0331_resize.thumb.JPG.145c3361d04b751fe060db51d9f18382.JPGA9X_0337_resize.thumb.JPG.446a6f9ffd9ac0229637073ea219cbe1.JPG

Had the shell dipped at Recoat paint stripping and have now started spraying the epoxy/prime.

A9X_0367_resize.thumb.JPG.a535e0a84ba02957099127e10660315f.JPGA9X_0394_resize.thumb.JPG.768f75669ffb32abb382935ed32bb676.JPGA9X_0396_resize.thumb.JPG.a8b104121d4f9f16cb24f756fec06e07.JPG

  • Like 7

Yes had it dipped at Recoat paint stripping, they work out of their shed behind their house. I don't think Recoat smash repair are going anymore after the death of a worker the other year.

  • 2 months later...

Update time. Having the shell dipped has turned out to be more work than I thought.

About 14 holes have been drilled in the shell that they never told me they were going to do so these had to be welded up.

Yes that is a hole drilled in the middle of the roof skin.

A9X_0404_resize.thumb.JPG.9b7e2988ca8703c87820f90346779031.JPG

A9X_0406_resize.thumb.JPG.df706a64c431e5105d7d8dccea9ac7ba.JPG

 

 

I was surprised at the amount of rust that started to form under panels, I had tack welded the sill panel and two extra roof braces on to the shell and removed them when I got the shell home.

 

A9X_0412_resize.thumb.JPG.4ce36a6ad99ea190ef38aeccb440cbae.JPG

A9X_0386_resize.thumb.JPG.b819163ea0fb05c3659fa386187b9882.JPG

 

There are also spots where it looks like acid is still leaching out of the seams.

 

A9X_0399_resize.thumb.JPG.d734ffef3962fade3451ea325c3a0d36.JPGA9X_0400_resize.thumb.JPG.a6e553ccf8c207c9fa18260d84015fc2.JPG

I was also surprised at the amount of body deaden-er and seam sealer that was still in the shell.

The black shape in the middle of the photo is one of the many big of body deaden-er.   

A9X_0401_resize.thumb.JPG.5fd5ba38bf08e317bfffbd87aec3e197.JPG

 

 

I have had to strip and clean and sand every part of the shell so finally got the inside and underneath painted with KBS.

A9X_0414_resize.thumb.JPG.5f2e45ae27d74194a65bc986998d1266.JPG

One coat of silver KBS, still need to seam seal then a coat of black KBS.

A9X_0418_resize.thumb.JPG.42402dfb283097bf789906cb26fb84b2.JPG

A9X_0424_resize.thumb.JPG.540afbaf682c4b2c28581d612c982ab8.JPG

A9X_0425_resize.thumb.JPG.e4b85fad84755da736915a15158dc9a3.JPG

  • Like 4

Were the holes for drainage? breathing? 

And yes, poor form not to at least advise. Maybe they assumed you knew? First I've heard of it but I have never done this level of work to a shell. 

I've never thought of painting the inside of the body with KBS. My plan always only included doing the under body...but now you have me thinking....

Will this be the only form of sound deadening in the interior, or will you still be putting something like Dynamat under the carpet? Or, is this KBS just a sealer / rust killer paint rather than a sound deadening coating?

Edited by Tenny
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...