Jump to content
SAU Community

Recommended Posts

Good news is the OP of the white EMO has put the car up for sale!

http://www.gumtree.com.au/s-ad/mount-waverley/cars-vans-utes/2003-mitsubishi-lancer-sedan/1021137134

Bad news is he's forgotten to mention the small bit of damage in his advertisement.

Wow...just wow :blink:

Having been on a track day with this guy I'm thanking my lucky stars that he was in a different group to me :ph34r:

I was in that group, there were a few kamakazi drivers there and almost got cleaned out by a few of them, he just happened to be the chosen one who pushed it too far and assumed wrongly. Packed up my stuff and left half way through the day after the incident as its not worth risking my car.

  • Like 1

Not the organisers fault as they can only do so much. But hope that the guys really bust balls at the next driver briefing as I have always loved attending their well run days. If people think because they are faster than me I don't deserve to be on the same track as them despite having paid the same entry fee....and they are not told to pull their head in by clerk of course then I will soon voice my concerns and go home as well :(

  • Like 1

Realistically if people know who this person actually is... Should be highlighted to AASA / CAMS & see to it the license should perhaps be cancelled. Person clearly have a warped perception of what is safe and it's not only putting themselves in danger and more incidents, but other people as well.

Give the guy a chance to learn from his mistake....up to officials to report him and note on his licence. Not sure we have enough info to lynch the guy But if you supply the beers then i can hunt around for some tar and feathers

different events across the state, different officials - different organisers. Never going to get the same people.

The only common point is the guys attitude/skill is just wrong! Even if it's just to sit him down in front of a few people to tell him it has to stop before there is more damage - perhaps even a death by putting someone into a wall?

The Gumtree ad said sold. lol.

If its the bloke who I narrowed it down to, he is not new, and competed in many events in many types of cars.

Attitude is the issue. Not lack of experience.

^ This. Although I thought you said Evotards couldn't drive to save themselves... :P

As someone who enjoys those tampered days I'd really like to know who the guy is (someone PM me), though the car is easy enough to identify.

I commented on the MX-5 youtube vid yesterday about how he was in the wrong and the comment was deleted, another similar comment appeared this morning which I've replied to so we'll see how long they last.

No doubt the camera car is in the wrong and if the guy can run a 27 around Winton he must be able to steer half decently, that sayd nothing for his etiquette or as I mentioned on Youtube his racecraft.

I know my times well and report them honestly but I always find I am in a category with cars that are considerably faster and slower than me which makes me wonder if some people either don't know their times or report them inaccurately so they can feel awesome blasting past everyone. I've said before I think the groups should be re-ordered part way through the day as drivers put down faster times.

I get, and try to abide by, the passing on straights only or only when waved through but I'll admit that there's been times when I've been on a hot lap and know it's a good time where I've taken a greater risk to pass someone at speed on a corner who did not wave me through, partly because it's costing me money to be there and I'm there to set times and partly because sometimes people have you sit behind them for half the bloody track before they will wave you through.

The issue is also one of balance as you get things like XR6 Turbos hammering down straights then holding you up through every corner, as the MX-5 guys will be acutely aware.

I think there should be much stricter adherence to groupings based on lap times run not just reported and that people running beyond a certain time should be classified as being experience drivers who should know better and be punished accordingly when they get it so badly wrong.

Edited by ActionDan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...