Jump to content
SAU Community

Recommended Posts

i too am looking into getting tune done on my r33 gtr am running tomei reytec ecu. software is in english . has wideband and datalogging etc. any suggestions who has any experience with these ecus. i have put a run in tune myself , very easy to operate...

I'll need more than 1 to curb the depression!

More beers it will be then, Man that thing should be making close to what it is on E85 on pump fuel with the right tune.

Mine only has:

Unopened Engine

Apexi Power FC

CAI BOX with Pod

Yellow Jacket Coil Packs

Z32 AFM

3" Turbo back + High Flow Cat

660cc Injectors

Bosch 044 Pump

Hypergear SS1PU Turbo - 20psi peak fading to 17psi (I need to set it to hold boost @ 20psi then it will make 400, ran out of dyno money to dial in the EBC to hold pressure)

That is what got me the 377hp on 98.

Speaking of signing up will be as soon as my gtr lands !!! Wanted to know is there any other track days or happy laps events that happen other than the ones that are on the 2013 agenda as I work away from brisy and 90% of these days are on my days away with work which I am spewing about !?!?

Speaking of signing up will be as soon as my gtr lands !!! Wanted to know is there any other track days or happy laps events that happen other than the ones that are on the 2013 agenda as I work away from brisy and 90% of these days are on my days away with work which I am spewing about !?!?

Hey mate,

The calendar has grown to be more of a rough guide as to when events are. If we have our way, there should be a few more track days coming around. Our aim has been to have an event each week so that people, such as yourself, who can't make it to one can make it to something else. With timing on these things, it does come down to QR and when they can let us use the track but we have strived to have a happy laps sesh every 6 weeks. Usually, a few weeks before the end of the month, I will post up events for the upcoming month. All of these will be confirmed and good to go ahead, unless stated otherwise. We also go through a rundown of the upcoming events at the monthly meeting (first Wednesday of the month).

All in all, there is a lot more coming up than what is on the calendar. Keep an eye out and you will be impressed. ;)

Cheers,

Tony

Just had a look at all star tuning and performance, just from looking at his web page it's very impressive. Has anyone ever taken there car to mercury Motorsport or heard anything about them?

  • Like 1

There's a few bad reports about MM including mine in the R35 section, I would strongly advise you go see Gavin Woods at Labrador, a lot of guys use him including myself and he is well experienced with skylines, even GTR35's.

you can also use a Power FC and run E-flex, my car for example does and I havnt had any problems with it,

Tohmez run with what angry said about MM and I have asked the same question about tuners in brisy north side in particular and I am guna go see all star as isn't to far from me and highly recommended by many!

Tony thanks for the info on additional events got me more psyched again to enjoy the common interest with everyone on here that others without skylines don't get !!! Look forward to see everyone's machines and gain valuable advice !

Tohmez run with what angry said about MM and I have asked the same question about tuners in brisy north side in particular and I am guna go see all star as isn't to far from me and highly recommended by many!

Tony thanks for the info on additional events got me more psyched again to enjoy the common interest with everyone on here that others without skylines don't get !!! Look forward to see everyone's machines and gain valuable advice !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...