Jump to content
SAU Community

Recommended Posts

Just my two cents - I personally went with Carlos from Millennium Motorsport. After we finished the build, completed a safe road and ensured the car was right for the dyno I took it to him. He had the car tuned in one day but opted to keep it for a few to sort out the cold start accurately. His customer service was professional and anything that was needed to be explained was done so in person. Very genuine guy.

Results - 402.6rwhp @ only 15psi (on pump 98) and the car drives like a dream. Car wanted to keep making power but we agreed to keep it safe (being stock bottom end).

Have heard good things about millennium not bad readings at the same boost level I'm running.

Out of curiosity what was it like price wise ?

Forgot about this thread. Got my car back Thursday from All Star Tuning. Makes 447rwhp on 22psi with E85. Car drives a heap better than it did and he sorted out a few of the demons i was getting and thinned out my very very rich tune.

Highly recommend Richard there

Going back to All Star tuning in brendale next week for the next round of work I planned out with Richard. If you are looking for a Tuner I highly recommend him even if it is just for a second opinion or to sound an Idea out.

  • 1 month later...

Is that with Nistune, Clint? Would you recommend over EFI?

No, I have a Power FC, I have not asked if Richard tunes Nistunes.

Sean (EFI) is the guy to go see for Nistunes as he does fantastic work at an affordable rate.

Nice random hero, just asking cause iv just bout a second hand nistune inside of a standard r34 ecu and wondering if all star tuning and performance work with nistunes or if not who's the next best?

If you had to get a power figure what would you say my r34 would make with these mods

Nistune ecu, large front mount intercooler, splitfire coilpacks, pod filter, full 3" turboback, larger fuel pump and a z32 afm?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...