Jump to content
SAU Community

Recommended Posts

Is that at efi? Shouldn't all dyno'd read the same power figure

Thats at EFI, The first rule of dynos is they can read what ever you want them to, such as the 365 RWKW stock rodeo at the last dyno day.

  • Like 1

Thats at EFI, The first rule of dynos is they can read what ever you want them to, such as the 365 RWKW stock rodeo at the last dyno day.

Rodeo wasn't stock. The letters in the number plate were hks hence the extra power.

Dynos can easily be modified to produce all sorts of readings. Mess with the calibration a little and it will read higher or lower.

Stock on 10psi with bigger intercooler, splitfire coilpacks, 600hp walbro apparently, full 3" varax exhaust and of course a pod filter for them power gains

Apparently he got the stock ecu tuned of that's possible when I bought it

Most of the places here are top workshops. If I were you I'd go to which ever is easiest for you to get to and talk to them to get av feel for them. If you like them and are comfortable with it then go with them. ...

If you aren't in too much of a hurry, use Toshi when he comes back up.

I saw that you had posted here and immediately figured that you would recommend Toshi :P

When is he back up next? Doesn't lack of Dyno make it harder?

Lack of dyno = better tune ;)

But he can use a shop dyno if so required

Huh?

It has to be going through the rev range in gear to tune it properly. Cars like yours, Ants', Bunta's would hit stupid speeds in 3/4th at high rpm. Where do you get that? Your property is long, but not that long! :P

Huh?

 

It has to be going through the rev range in gear to tune it properly. Cars like yours, Ants', Bunta's would hit stupid speeds in 3/4th at high rpm. Where do you get that? Your property is long, but not that long! :P

I died a road tune once. My heart isn't strong enough for another

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...